Pioneer VSX-47TX User Manual download pdf (Page 34)

34

Display

All the display information is explained and/or referenced here.

5 Digital format indicators

2 DIGITAL : Lights when a Dolby Digital signal is

detected.

DTS: Lights when a DTS signal is detected.

MPEG: Lights when an MPEG signal is detected.

THX: Lights when the HOME THX mode is

selected.

EX: Lights during Surround EX matrix processing.

ES: Lights during DTS ES processing.

DISC: Lights during DTS ES discrete processing

MTRX: Lights during DTS ES matrix processing

2 PRO LOGIC II: Lights during Dolby Pro Logic

II processing.

NEO:6: Lights during NEO:6 processing.

2CH PLAYBACK Lights during two-channel

playback.

6 Speaker indicators

Light to indicate the current speaker system, A

and/or B.

7

TAPE 2 indicator

Lights when the TAPE 2 monitor is on.

8

TUNER indicators

MONO: Lights when the tuner is set to receive

FM broadcasts and when selected MPX mode.

STEREO: Lights when a FM stereo broadcast is

received in the auto stereo mode.

TUNED: Lights when a broadcast is received.

1 SIGNAL SELECT indicators

Light to indicate the input signal you selected.

ANALOG: Lights when analog signals are

assigned.

DIGITAL: Lights when digital audio signals are

selected.

2 RF: Lights when 2 RF signals are assigned.

AUTO: Lights when the receiver is set to select

the input signal automatically.

2 Program Format indicators

For Dolby Digital or DTS sources : These

indicators change according to which channels

are active in the source. When all three LS (left

surround), S (surround) and RS (right surround)

light at the same time it means a source with a

6.1 channel playback flag is being used.

L – Left front channel.

C – Center channel.

R – Right front channel.

LS – Left surround channel.

S – Surround channel (mono).

RS – Right surround channel.

LFE – Low Frequency Effects channel.

((( ))) – Lights when LFE signal is input.

3 Analog level indicators

OVER – This lights if the signal is in danger of

distorting for analog source signals. Press

INPUT ATT on the front panel to lower the

signal level.

ATT – Lights when INPUT ATT is used to

reduce the level of the analog source signal.

4 Character display

Shows current mode, status, etc.

DIGITAL

PRO LOGIC

2ch

PLAYBACK

MPEG

DISC MTRX

Neo :6

OVER ATT

RDS

RF ATT

TUNED STEREO

MONO

SP

A

B

L

LFE

TAPE 2

CR

L

S

SR

S

3

ENO

SIGNAL

AUTO

RF

DIGITAL

ANALOG

1 2 4 53

678

Displays & Controls

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 111 112

Comments to this Manuals

No comments