Pioneer VSX-832 User Manual download pdf (Page 72)

100

101

> Before Start > Part Names > Install > Initial Setup > Playback

Advanced Setup | Supplementary Information | Others

work

0 You may not receive radio waves due to bad radio wave

conditions. Shorten the distance from the wireless LAN

router or remove obstacles to improve visibility, and try

again. Place the unit away from microwave ovens or

other access points. It is recommended to place the

wireless LAN router and the unit in the same room.

0 If there is a metallic object near the unit, wireless LAN

connection may not be possible as the metal can effect

on the radio wave.

0 When other wireless LAN devices are used near the unit,

several issues such as interrupted playback and

communication may occur. You can avoid these issues

by changing the channel of your wireless LAN router. For

instructions on changing channels, see the instruction

manual provided with your wireless LAN router.

0 There may not be enough bandwidth available in the

band for wireless LAN. Connect using an Ethernet cable.

∫ Remote Controller

0 Make sure that the batteries are installed with the correct

polarity.

0 Install new batteries. Do not mix different types of

batteries, or old and new batteries.

0 Make sure that the unit is not subjected to direct

sunshine or inverter-type fluorescent lights. Relocate if

necessary.

0 If the unit is installed in a rack or cabinet with colored-

glass doors or if the doors are closed, the remote

controller may not work reliably.

∫ Display

The display doesn't light

0 The display may go dim while the Dimmer is working,

and may also turn off. Press DIMMER to change the

brightness level of the display.

∫ Others

Strange noises can be heard from the unit

0 If you have connected another unit to the same wall

outlet as this unit, this noise may be an effect from the

other unit. If the symptoms improve by unplugging the

power cord of the other unit, use different wall outlets for

this unit and the other unit.

The message "Noise Error" is displayed during Full

Auto MCACC

0 This can be caused by a malfunction in your speaker

unit. Check if the unit produces normal sounds.

The results of Full Auto MCACC give a different

distance to the speakers than the actual distance

0 There may be some discrepancies in the results

depending on the speakers you are using. If this is the

case, make the settings in "System Setup" - "Speaker" -

"Distance" in the Home screen.

DRC function does not work

0 Make sure the source material is Dolby Digital, Dolby

Digital Plus, Dolby TrueHD, or DTS.

1 ... 71 72 73 ... 566

Comments to this Manuals

No comments

Pioneer VSX-832 User Manual Page 72

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-832