Pioneer VSX-919AH-S User Manual download pdf (Page 55)

Listening to your system 06

55

En

Using Stream Direct

Use the Stream Direct modes when you want

to hear the truest possible reproduction of a

source. All unnecessary signal processing is

bypassed, and you’re left with the pure analog

or digital sound source.

• While listening to a source, press

, then press

AUTO/ALC/DIRECT

(

AUTO SURR

/

ALC

/

STREAM DIRECT

) to select

the mode you want.

Check the digital format indicators in the front

panel display to see how the source is being

processed.

• AUTO SURROUND – See Auto playback on

page 52.

• ALC – Listening in Auto level control mode

(page 52).

• DIRECT – Sources are heard according to

the settings made in the Surround Setup

(speaker setting, channel level, speaker

distance, acoustic calibration EQ, and X-

curve), as well as with dual mono, the input

attenuator, and any sound delay settings.

You will hear sources according to the

number of channels in the signal.

• PURE DIRECT – Analog sources are heard

without any digital processing. No sound is

output from the Speaker B in this mode.

Using surround back channel

processing

•Default setting: SBch ON

You can have the receiver automatically use 6.1

or 7.1 decoding for 6.1 encoded sources (for

example, Dolby Digital EX or DTS-ES), or you

can choose to always use 6.1 or 7.1 decoding

(for example, with 5.1 encoded material). With

5.1 encoded sources, a surround back channel

will be generated, but the material may sound

better in the 5.1 format for which it was

originally encoded (in which case, you can

simply switch surround back channel

processing off).

• With a 7.1-channel surround system, audio

signals that have undergone matrix

decoding processing through surround

back channel processing to which the Up

Mix function is added are output from the

surround back speakers.

• Press , then press

SBch

repeatedly to cycle the surround back

channel options.

Each press cycles through the options as

follows:

• SBch ON –

Matrix decoding processing for

generating the surround back component

from the surround component is turned on.

• SBch AUTO – Matrix decoding processing

for generating the surround back

component from the surround component

is switched automatically. Matrix decoding

processing is only performed when

surround back channel signals are

detected in the input signals.

• SBch OFF –

Matrix decoding processing for

generating the surround back component

from the surround component is turned off.

RECEIVER

RECEIVER

VSX-1019_DF.book 55 ページ２００９年３月１３日　金曜日　午前９時５８分

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 121 122

Comments to this Manuals

No comments