Pioneer CD/MP3/WMA User Manual download pdf (Page 18)

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Use MULTI-CONTROL to select LOCAL.

The function name tag LOCAL is highlighted.

2 Press MULTI-CONTROL to turn local

seek tuning on.

Local seek sensitivity (e.g., Local 2) appears in

the display.

# To turn local seek tuning off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to

set the sensitivity.

There are four levels of sensitivity for FM and

two levels for AM:

FM: Local 1Local 2Local 3Local 4

AM: Local 1Local 2

The Local 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

1 Use MULTI-CONTROL to select BSM.

The function name tag BSM is highlighted.

2 Press MULTI-CONTROL to turn BSM on.

Searching begins to flash. While Searching is

flashing the six strongest broadcast frequen-

cies will be stored under preset tuning buttons

16 in the order of their signal strength. When

finished, the preset channel list appears.

# To cancel the storage process, press

MULTI-CONTROL.

3 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

Note

Storing broadcast frequencies with BSM may re-

place broadcast frequencies you have saved

using buttons 16.

Selecting stations from the

preset channel list

The preset channel list lets you see the list of

preset stations and select one of them to re-

ceive.

1 Turn MULTI-CONTROL to switch to the

preset channel list mode.

2 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To store the currently received frequency in

memory, press and hold MULTI-CONTROL until

the selected preset number stops flashing.

# To return to the frequency display, press

BAND/ESC.

Tuner

En

18

Section

04

1 ... 17 18 19 ... 150

Comments to this Manuals

No comments