Pioneer DEH-80PRS User Manual download pdf (Page 27)

5 Turn M.C. to select cut-off frequency.

50—63—80—100—125—160—200 (Hz)

Only frequencies higher than those in the se-

lected range are output from the front speak-

ers.

6 Turn LEVER to adjust the output level

of the front speakers.

0 to –24 is displayed as the level is increased

or decreased.

Setting the high pass filter for rear

speakers

1 Use M.C. to select R.HPF 1.

Refer to Introduction of audio adjustments on

page 20.

2 Turn LEVER to select slope.

–12— –6—Pass (dB/oct.)

# If you set the slope Pass (0 dB/oct.), the audio

signal bypasses the filter, so the filter does not

have an effect.

3 Press /DISP to display the upper tier.

4 Use M.C. to select R.HPF 2.

Refer to Introduction of audio adjustments on

page 20.

5 Turn M.C. to select cut-off frequency.

50—63—80—100—125—160—200 (Hz)

Only frequencies higher than those in the se-

lected range are output from the rear speak-

ers.

6 Turn LEVER to adjust the output level

of the rear speakers.

+6 to –24 is displayed as the level is increased

or decreased.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on page 29).

You can turn the auto-equalizer on or off.

1 Use M.C. to select A.EQ in the audio

function menu.

Refer to Introduction of audio adjustments on

page 20.

# If auto TA and EQ has not been carried out,

Please set Auto EQ appears. This indicates that

you cannot turn this function on.

2 Press M.C. to turn the auto-equalizer

on.

Auto EQ ON appears in the display.

# To turn auto-equalizer off, press M.C. again.

Recalling equalizer curves

You can adjust the equalization to match the

car’s interior acoustic characteristics as de-

sired.

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Display Equalizer curve

Super bass Super bass

Powerful Powerful

Natural Natural

Vocal Vocal

Flat Flat

Custom1 Custom 1

Custom2 Custom 2

! Custom1 and Custom2 are adjusted equal-

izer curves that you create. Adjustments

can be made with a 16-band graphic equal-

izer.

! When Flat, no changes are made to the

sound. You can check the effects of the

equalizer curves by switching alternatively

between Flat and another equalizer curve.

% Press EQ/DISP OFF to select the equali-

zer.

Press EQ/DISP OFF repeatedly to switch be-

tween the following equalizers:

Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super bass

En

27

Section

02

Operating this unit

Operating this unit

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comments to this Manuals

No comments