Pioneer DEH-P3800MP User Manual download pdf (Page 36)

Setting the rear output and

subwoofer controller

This units rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (R-SP :FUL) or subwoofer

(R-SP :S/W) connection. If you switch the rear

output setting to R-SP :S/W, you can connect

a rear speaker lead directly to a subwoofer

without using an auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (R-SP :FUL). When rear output is

connected to full range speakers (when

R-SP :FUL is selected), you can connect other

full range speakers (P/O :FUL) or a subwoofer

(P/O :S/W) to the RCA rear output.

1 Press FUNCTION to select R-SP.

Press FUNCTION repeatedly until R-SP ap-

pears in the display.

2 Press a or b to switch the rear output

setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear

output, select R-SP :FUL.

# When a subwoofer is connected to the rear

output, set for subwoofer R-SP :S/W.

# When the rear output setting is R-SP :S/W,

you cannot operate the following procedure.

3 Press c or d to switch the subwoofer

output or rear output.

Pressing c or d will switch between P/O :S/W

and P/O :FUL and that status will be displayed.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

32).

! If you change this setting, subwoofer output

in the audio menu return to the factory

settings.

Initial Settings

En

36

Section

09

1 ... 35 36 37 ... 59

Comments to this Manuals

No comments