Pioneer AVH-3300BT User Manual download pdf (Page 45)

Audio Adjustments

Note

When selecting FM as the source, you cannot

switch to Source Level Adjuster.

Using fader/balance adjustment

You can change the fader/balance setting to

provide an ideal listening environment for all

of the occupied seats.

1 Display the audio function menu.

Refer to Introduction of menu operations on

the previous page.

2 Touch Fader/Balance on the audio func-

tion menu.

3 Touch a or b to adjust the front/rear

speaker balance.

Range: Front:15 to Rear:15

# Select F/R: 0 L/R: 0 when only using two

speakers.

# The front/rear speaker balance cannot be ad-

justed when the rear output setting is

Subwoofer. Refer to Setting the rear output and

subwoofer controller on page 62.

4 Touch c or d to adjust the left/right

speaker balance.

Range: Left:15 to Right:15

Using the equalizer

You can adjust the equalization to match the

car’s interior acoustic characteristics as de-

sired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Display Equalizer curve

Powerful Powerful

Natural Natural

Display Equalizer curve

Vocal Vocal

Custom1 Custom 1

Custom2 Custom 2

Flat Flat

Super Bass Super bass

! The equalizer curves for Custom1 and

Custom2 can be adjusted.

! You cannot select Custom1 and Custom2

when using the auto-equalizer.

! When Flat, no changes are made to the

sound. You can check the effects of the

equalizer curves by switching alternatively

between Flat and another equalizer curve.

1 Display the audio function menu.

Refer to Introduction of menu operations on

the previous page.

2 Touch Graphic EQ on the audio function

menu.

# You can select Graphic EQ when Auto EQ

function is off.

3 Touch c or d to select the desired item.

Powerful—Natural—Vocal—Custom1—

Custom2—Flat—Super Bass

Adjusting the 8-band graphic equalizer

You can adjust the level of each band for the

equalizer curves.

! A separate Custom1 curve can be created

for each source. If you make adjustments

when a curve other than Custom2 is se-

lected, the equalizer curve settings will be

recorded in Custom1.

! A Custom2 curve that is common for all

sources can be created. If you make adjust-

ments when the Custom2 curve is se-

lected, the Custom2 curve will be updated.

1 Display the audio function menu.

Refer to Introduction of menu operations on

the previous page.

En

45

Section

13

Menu operations

Menu operations

1 ... 44 45 46 ... 96

Comments to this Manuals

No comments