Pioneer AVIC-F9310BT User Manual download pdf (Page 149)

A picture is enlarged by the same propor-

tion as “Full” or “Zoom” in the horizontal di-

rection and by an intermediate proportion

between “Full” and “Zoom” in the vertical

direction; ideal for a cinema-sized picture

(wide screen picture) where captions lie

outside the frame.

! Zoom (zoom)

A 4:3 picture is enlarged in the same pro-

portion both vertically and horizontally;

ideal for a cinema-sized picture (wide

screen picture).

! Normal (normal)

A 4:3 picture is displayed normally, giving

you no sense of disparity since its propor-

tions are the same as that of the normal

picture.

p You can only adjust “Wide Mode” when se-

lecting an AV source with video.

p Different settings can be stored for each

video source.

p The same setting is automatically applied

for the following grouping.

! DVD-V and DivX

! AV1 and AV2

p When viewing videos, select an appropriate

wide screen mode that matches its original

aspect ratio to view it comfortably.

p Remember that use of this system for com-

mercial or public viewing purposes may

constitute an infringement on the author’s

rights protected by the Copyright Law.

p The navigation map and the rear view cam-

era picture is always viewed at “Full”.

Setting the rear output

The navigation system’s rear output can be

used for a full-range speaker or subwoofer

connection. If you switch “Rear SP” to

“Sub. W”, you can connect a rear speaker lead

directly to a subwoofer without using an auxili-

ary amp.

Initially, the navigation system is set for a rear

full-range speaker connection (“Full”).

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting. (When you use the product

without RCA rear output, this setting only

applies to the rear speaker leads.)

p “Rear SP” can be set only when the source

is selected to “Off”.

p AVIC-F9310BT is not compatible with the

wiring that the subwoofer is directly con-

nected to rear speaker leads. Always use

the setting with “Full”.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the screen for

AV system settings on page 147.

2 Touch [Rear SP].

Each touch of [Rear SP] changes the settings

as follows:

! Full

When no subwoofer is connected to the

rear output, select “Full”.

! Sub. W

When a subwoofer is connected to the rear

output, select “Sub. W”.

Switching the muting/

attenuation timing

You can mute the AV source volume or attenu-

ate the output signal.

p Even if this setting is “Off”, the navigation

system will mute or attenuate the AV

source volume when the mute signal is out-

put via MUTE lead.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the screen for

AV system settings on page 147.

2 Touch [Mute].

Each touch of [Mute] changes the settings as

follows:

AVIC-F30BT

! Guide/Tel/VR: The volume is muted or atte-

nuated according to the following condi-

tions.

Engb

149

Chapter

26

Customising preferences

Customising preferences

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 207 208

Comments to this Manuals

No comments