Pioneer AVIC-X1 User Manual download pdf (Page 52)

50

Chapter 4

Editing the Navigation Utilities NAVI

To clear values...

If you want to delete the learned results stored in

“Distance”, “Speed Pulse” or “Learning Sta-

tus”, touch the relevant result, then touch

“Clear”.

❒ This unit can automatically use two types of

sensor memory based on the outer dimen-

sions of the tyres.

Checking the connections of

leads and installation positions

Check that leads are properly connected between

the navigation unit and the vehicle. Please also

check whether they are connected in the correct

positions.

1 Touch “Information” in the Main menu,

then touch “Connection Status”.

The Connection Status screen appears. Either

“OK” or “NG” (or “No”) appears on the

screen, and the connection status of each

cable is shown.

1. Speed Pulse

The Speed Pulse value detected by this unit

is shown. “0” is shown while the vehicle is

stationary.

2. GPS Aerial

Indicates the connection status of the GPS

aerial, the reception sensitivity, and from

how many satellites the signal is received.

3. Installation Position

The Installation position of the navigation

unit is shown.

4. Hand brake

When the handbrake is applied, “On” is dis-

played. When the handbrake is released,

“Off” is displayed.

5. Power Voltage

The power supply (reference value) pro-

vided from the vehicle battery to this unit is

shown. If the voltage does not fall within the

range of 11 to 15V, check that power cable

connection is correct.

6. Illumination

When the headlights or small lamps of a

vehicle are on, “On” is displayed. (If the

orange/white lead is not connected, “Off”

appears.)

7. Back Signal

When the gear lever is shifted to “R”, the

signal switches to “High” or “Low”. (Which

of these is displayed depends on the vehi-

cle.)

Setting the Vehicle Dynamics

Display

You can change the values displayed by the

instruments on the left and right of the Sensor

View.

❒ Vehicle Dynamics cannot be displayed if

sensor initialisation is not complete.

1 Switch to the Vehicle Dynamics Display.

➲ Changing the map display mode ➞

Page 23

2 Touch the left or right instrument.

Touch keys are displayed.

3 Touch the items you want to display.

You can select the following items.

•Voltage

•Acceleration:

Acceleration in a forward direction is dis-

played. The + sign indicates acceleration

while the – sign indicates deceleration.

•Side Acceleration:

Acceleration in the lateral direction is dis-

played. The + sign indicates a left turn, while

the – sign indicates a right turn.

•Angular Velocity

1

2

3

4

5

6

7

CRB1903B_ENGLISH.book Page 50 Monday, May 10, 2004 4:01 PM

1 ... 51 52 53 ... 124

Comments to this Manuals

No comments