Pioneer AVIC-X1BT User Manual download pdf (Page 11)

9

Reset the navigation system

without changing the condition

memory

Pressing the RESET button of the navigation

system lets you reset the microprocessor to its

initial settings without changing the condition

memory.

The microprocessor must be reset under the fol-

lowing conditions:

• Prior to using this product for the first time

after installation.

• If the product fails to operate properly.

• If there appear to be problems with the opera-

tion of the system.

• When changing the combination of the equip-

ment.

• When adding/removing additional products

that connect to the navigation system.

• When the display and the Hide-away units are

re-connected.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or

other pointed instrument.

❒ If you have connected other equipment (for

example, Bluetooth adapter) to this navigation

system, be sure to reset that equipment too.

Reset the navigation system to

the initial (factory) setting

When you want to erase memorised settings and

return the navigation system to its initial (factory)

settings, carry out the following operations.

1 Turn the engine ON or set the ignition

switch to ACC position.

2 Press the RESET button with a pen tip or

other pointed instrument.

❒ Some navigation settings and data are not

erased.

About the data of the navigation

system being deleted

The information is erased by pressing the RESET

button or disconnecting yellow lead from the bat-

tery (or removing the battery itself. However, the

following items are not erased:

• Sensor learning status and driving status

• Memory area memorised manually

• Areas to avoid

• Registered Locations in “Address Book”

• Data registered in “Emergency Info”

Resetting the Bluetooth Adapter

• Pressing the RESET button of the Blue-

tooth adapter with the ignition switch ON

(ACC ON) erasing the contents of the

adapter’s memory.

Reset the Bluetooth adapter

without erasing the memory

Pressing the RESET button of the Bluetooth

adapter lets you reset the adapter to its initial set-

tings without erasing the memory.

The Bluetooth adapter must be reset under the

following conditions:

• Prior to using this adapter for the first time

after installation.

• If there appear to be problems with the opera-

tion of the Hands-free Phoning function.

• When the Bluetooth adapter and the naviga-

tion system are re-connected.

RESET button

1 ... 10 11 12 ... 26

Comments to this Manuals

No comments