Pioneer AVH-P4200DVD User Manual download pdf (Page 65)

3 Touch Rear Speaker on the system

menu to switch the subwoofer output or

full-range speaker.

# When no subwoofer is connected to the rear

output, select Full (full-range speaker).

# When a subwoofer is connected to the rear

output, select Subwoofer (subwoofer).

# When the rear output setting is Subwoofer,

you cannot operate the following procedure.

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

48).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

! Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Setting the FM tuning step

Normally, the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

! The tuning step remains at 50 kHz during

manual tuning.

1 Select the Radio source.

Refer to Basic Operations on page 10.

2 Display the system menu.

Refer to Introduction of menu operations on

page 46.

3 Touch FM Step on the system menu to

select the FM tuning step.

Touching FM Step will switch the FM tuning

step between 50 kHz and 100 kHz. The se-

lected FM tuning step will appear.

RDS setting

Limiting stations to regional

programming

When AF is used, the regional function limits

the selection of stations to those broadcasting

regional programs.

1 Select the Radio source.

Refer to Basic Operations on page 10.

2 Display the system menu.

Refer to Introduction of menu operations on

page 46.

3 Touch RDS Setup on the system menu.

4 Touch Regional on the function menu

to tur n the regional function on.

# To turn the regional function off, touch

Regional again.

Selecting alternative frequencies

When the tuner cannot get a good reception,

the unit automatically searches for a different

station in the same network.

1 Display the system menu.

Refer to Introduction of menu operations on

page 46.

2 Touch RDS Setup on the system menu.

3 Touch Alter native FREQ to turn AF on.

# To turn AF off, touch Alternative FREQ again.

Note

Sound may be temporarily interrupted by another

program during an AF frequency search.

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Turn the unit off.

Refer to Basic Operations on page 10.

En

65

Section

13

Menu operations

Menu operations

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 95 96

Comments to this Manuals

No comments