Pioneer DEH-P7400MP User Manual download pdf (Page 20)

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a

CD with your built-in CD player. More advanced

CD operation is explained starting on page 21.

1 TRACK NUMBER indicator

Shows the track currently playing.

2

PLAY TIME indicator

Shows the elapsed playing time of the cur-

rent track.

1 Press

OPEN to open the front panel.

CD loading slot appears.

• After inserting a CD, press

SOURCE to select

the built-in CD player.

2 Insert a CD into the CD loading slot.

Playback will automatically start.

CD loading slot

EJECT button

• You can eject a CD by pressing EJECT.

• To avoid a malfunction, make sure that no

metal object comes into contact with the front

panel is open.

3 After a CD has been inserted, close the

front panel.

4 Use

VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

5 To perform fast forward or reverse, press

and hold 2 or 3.

6 To skip back or forward to another track,

press 2 or 3.

Pressing 3 skips to the start of the next track.

Pressing 2 once skips to the start of the current

track. Pressing again will skip to the previous

track.

Notes

• The built-in CD player plays one, standard,

12-cm or 8-cm (single) CD at a time. Do not

use an adapter when playing 8-cm CDs.

• Do not insert anything other than a CD into

the CD loading slot.

• If you cannot insert a disc completely or if

after you insert a disc the disc does not play,

check that the label side of the disc is up.

Press EJECT to eject the disc, and check the

disc for damage before inserting the disc

again.

• 5 and ∞ are used at the time of MP3 play-

back.

• If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11 may

be displayed. Refer to Understanding built-in

CD player error messages on page 50.

1

2

En

20

05

Section

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 111 112

Comments to this Manuals

No comments