Pioneer DJM-2000nexus User Manual download pdf (Page 15)

100

English

1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least

1 seconds.

The [USER SETUP] screen is displayed.

2 Press the settings item button and select [QUANTIZE].

The QUANTIZE function’s setting screen is displayed.

! [QUANTIZE] is added to the settings item button on the

[USER SET UP] screen.

3 Press [ON].

The QUANTIZE function turns on.

The QUANTIZE indicator ([QTZ]) and GRID indicator ([GRID]) on the

main unit display light or flash.

! Depending on the status of the DJ player (off air, scratching, reverse

playing, etc.), it may not be possible to receive the GRID information.

QUANTIZE indicator

GRID indicator

About the QUANTIZE indicator’s lighting status

[USER SET

UP] screen >

[QUANTIZE]

QUANTIZE function status [QTZ]

[ON]

QUANTIZE function activated (effects

synchronized to track’s tempo).

Lit

QUANTIZE function not activated (effects

not synchronized to track’s tempo, or BPM

measurement mode set to TAP).

Flashes

[OFF] Off

About the GRID indicator’s lighting status

Status of reception of grid information from DJ player [GRID]

GRID information being received. Lit

GRID information not being received. Off

4 Press the beat button, then press the [ON/ OFF]

button of [BEAT EFFECT].

The effect is added to the sound on beat with the tempo of the currently

playing track.

The beat positions and BPMs of tracks being played on Pioneer DJ play-

ers supporting the beat sync function (e.g. CDJ-2000nexus, CDJ-2000,

CDJ-900) can be synchronized.

STATUS INFORMATION

The display of the status of DJ players connected to the different chan-

nels and the beat sync information is concentrated here.

1 2 3 4 5

Indicates channels for which the fader start function

is enabled.

LINK

Indicates channels for which DJ players are properly

connected to the [LINK] terminal.

SYNC

Indicates the sync function status of the DJ player con-

nected to the [LINK] terminal.

MASTER

Indicates the current beat sync master.

MASTER BPM

Indicates the current master BPM.

FREQUENCY MIX

The currently playing sound is divided into seven frequency bands that

are displayed graphically. Fader control on the touch panel makes it

easier to grasp the details and mix two channels or swap instruments

(parts).

Channel assign

buttons

These select the channels to be mixed.

Volume level

display

The input volume level to this function is displayed in a

light color, the output volume level from this function is

displayed in a dark color.

Touch fader

These adjust the volume balance of the channels to be

mixed for the separate frequency bands.

<< >>

These move the touch fader immediately to the left or

right edge.

 To mix [CH2] and [CH3]:

Prepare this unit in advance so that the sound of [CH3] is being output

from the [MASTER] terminals.

1 Set the [CROSS FADER ASSIGN (A, THRU, B)] switches

for [CH2] and [CH 3] to [THRU].

! Set the [CROSS FADER ASSIGN (A, THRU, B)] switches of the chan-

nels to be mixed to [THRU].

! When using the crossfader, it is recommended to set it to the center

position.

2 Press [MIX].

The [FREQUENCY MIX] screen appears on the touch panel.

3 Press the channel assign buttons to select [CH2] for

the left side, [CH3] for the right side.

The volume levels for the individual frequency bands of the sound play-

ing in [CH3] are displayed on the right half of the touch panel.

4 Press all the [ >> ] buttons.

All the touch faders move to the right edge.

5 Press the [ON/ OFF] button.

This turns the effect on.

The [ON/ OFF] button flashes when the effect is on.

6 Move the channel fader for [CH2] to the back side.

The volume levels for the individual frequency bands of the sound play-

ing in [CH2] are displayed on the left half of the touch panel.

7 Move the touch fader to the left side.

The sound of the frequency bands whose crossfaders have been moved

is mixed and output.

! When the [ON/ OFF] button is pressed again, the effect turns off.

! To switch from the [FREQUENCY MIX] to the REMIX function, first

press [ON/OFF] to turn the effect off, then press [REMIX].

BEAT SLICE REMIX

When a track that has been analyzed with rekordbox is played, the sound

is sampled in beat with the track, and once sampling is completed the

sample is played in a loop.

The sampled sound can be sliced into equal parts, and the order in

which the sliced parts are played can be changed.

1 ... 14 15 16 ... 100

Comments to this Manuals

No comments

Pioneer DJM-2000nexus User Manual Page 15

Comments to this Manuals

Related products and manuals for DJ controllers Pioneer DJM-2000nexus