Pioneer DVD-V7400 User Manual download pdf (Page 27)

Command Descriptions

Execution :

String Status Return DVD player

NF<CR> or NR<CR> R<CR> Play mode to Scan mode

NS<CR> R<CR> Return to Play mode

5.13 Multi-Speed Forward (DVD, VCD)

5.14 Multi-Speed Reverse (DVD)

Function : Playback occurs at the speed specified in the Speed Register

(Option - Auto Stop)

Format : (Address)MF (Multi-Speed Forward)

(Address)MR (Multi-Speed Reverse) (Address > 0)

Explanation : If the player is in Random Access mode when the command is

executed, the player enters Multi-Speed mode and returns the completed

status message immediately.

While in Multi-Speed mode, pictures are reproduced at the speed specified

by the Speed Register. No audio tracks are played during Multi-Speed

playback.

NOTE: These speeds are approximate values only.

If an address is specified, an Auto Stop occurs on the selected sequence.

The specified address is written as a Mark Frame or Mark Time and is

compared with the current address. If the current address matches the

specified address, the player enters Pause or Still mode and returns the

completed status message. This command functions in a similar manner as

the Stop Marker command.

If another command is issued before the player reaches the specified

Address, the Auto Stop command is canceled and the player enters normal

Multi-Speed mode. However, if the disc program does not allow a pause, the

player ignores the command.

NOTE: DVD offers 1, 1/2, 1/4, 1/8, 1/16, STEP1 speed reverse when REV

STEP/REV PLAY is set to FRAME on a ADV. SETUP menu or offers only

SLOW speed reverse in case it is set to VOBU.

VCD offers 1/2 to 1/16 speed forward only. Sometimes, depending on its

forward speed, VCD Multi-Speed Forward may finish several frames earlier

then the target address because playback does not rely on Frame counts.

- 20

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 112 113

No comments

Pioneer DVD-V7400 User Manual Page 27