Pioneer MCS-FS131 User Manual download pdf (Page 87)

Troubleshooting 87

Troubleshooting

Wireless LAN

(MCS-838/MCS-434/MCS-FS232 only)

Problem Check Remedy

Network cannot be

accessed via wireless

LAN.

This unit and wireless LAN

router etc. are too far apart, or

there is an obstacle between

them.

Improve the wireless LAN environment by taking steps such as moving

the unit and wireless LAN router etc. closer together.

There is a microwave oven

or other device generating

electromagnetic waves near

the wireless LAN environment.

Use the unit in a place away from microwave ovens or others device

generating electromagnetic waves.

Avoid using devices generating electromagnetic waves as much as

possible when using the unit with a wireless LAN.

Multiple wireless devices are

connected to the wireless LAN

router.

:KHQFRQQHFWLQJPXOWLSOHZLUHOHVVGHYLFHVWKHLU,3DGGUHVVHVPXVWEH

changed.

Connection settings between

the unit and the wireless LAN

router etc. are not set up

correctly.

If the connection settings between the unit and the wireless LAN router

etc. are not set up correctly, connection settings much be performed in

order to connect the unit and the wireless LAN router etc.

The IP address settings for

the unit and the wireless LAN

router etc. (including DHCP

settings) do not match.

Check the IP address settings of the unit and the wireless LAN router

etc. (including the DHCP setting).

If the unit’s DHCP setting is on, turn the unit’s power off, then turn

the power back on. Check that the IP address of the unit matches the

settings of the wireless LAN router etc.

If the unit's DHCP setting is off, set an IP address matching the network

of the wireless LAN router etc.

For example, if the wireless LAN router’s IP address is “192.168.1.1”,

set the unit’s IP address to “192.168.1.XXX” (*1), the subnet mask to

“255.255.255.0”, and the gateway and DNS to “192.168.1.1”.

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and 248

that is not assigned to other devices.

The access point is set to

conceal the SSID.

In this case, the SSID may not be displayed on the access point list

screen. If not, set the SSID etc. by setting the wireless LAN settings on

the receiver manually.

The access point’s security

VHWWLQJVXVH:(3ELW

length code key or shared key

authentication.

7KHXQLWGRHVQRWVXSSRUW:(3ELWOHQJWKFRGHNH\RUVKDUHGNH\

authentication.

Unable to connect normally

XVLQJWKH:L)L'LUHFWIXQFWLRQ

Press

RETURN

RQWKHUHPRWHFRQWUROWRFORVHWKH:L)L'LUHFW0RGH

Screen. Then press the

button and perform the controls again from

WKH:L)L'LUHFW0RGH6FUHHQ

iPod/iPhone/iPad (MCS-838/MCS-434/MCS-FS232 only)

Problem Check Remedy

Can’t operate the iPod/

iPhone/iPad.

Is the iPod/iPhone/iPad

connected correctly?

Make sure the iPod/iPhone/iPad is connected correctly. Also, try

disconnecting the iPod/iPhone/iPad then reconnecting it.

Does the unit support the iPod/

iPhone/iPad?

Confirm that the connected iPod/iPhone/iPad is supported by this unit.

Is the iPod/iPhone/iPad

experiencing a hangup?

Try resetting the iPod/iPhone/iPad and then reconnect it to the unit.

1 ... 86 87 88 ... 576

Comments to this Manuals

No comments

Pioneer MCS-FS131 User Manual Page 87

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer MCS-FS131