Pioneer X-SMC11-S User Manual download pdf (Page 21)

USB playback 07

Chapter 7:

USB playback

Playing USB storage devices

It is possible to listen to two-channel audio using the USB

interface on the side of this unit.

• Pioneer does not guarantee that any file recorded on a

USB storage device will play or that power will be

supplied to a USB storage device. Also note that Pioneer

will accept no responsibility whatsoever for loss of files

on USB storage devices caused by connection to this

unit.

1 Press

USB

as the input source.

“USB/IPOD” is shown on the main display.

2 Connect the USB storage device.

The number of folders or files stored on the connected USB

storage device appear on the main display automatically.

• This unit does not support a USB hub.

• If an iPod/iPhone/iPad is connected to the unit, the unit

will automatically begin charging it.

3 When the recognition is completed, press



to start playback.

• When changing to a different input source, stop the USB

memory playback first, before changing.

4 Disconnect USB storage device from the

USB

terminal.

Turn the power off before removing the USB storage device.

Note

• USB flash drive that supports USB 2.0 can be used.

• This unit may not recognize a USB storage device, play

files or supply power to a USB storage device. For

details, see When a USB storage device is connected on

page 31.

• When a USB storage device is not playing and no

operations have been performed for more than 20

minutes, the unit will automatically power off.

• Auto power off can be switched to ON/OFF (page 35).

Repeat play

Repeat play can play one track, all tracks or a programmed

sequence continuously.

To repeat one track:

Press REPEAT repeatedly until “RPT ONE” appears. Press

ENTER.

To repeat all tracks:

Press REPEAT repeatedly until “RPT ALL” appears. Press

ENTER.

To repeat desired tracks:

Perform steps 1 to 5 in “Programmed play (CD or MP3/WMA)”

section on next page and then press REPEAT repeatedly until

“RPT ALL” appears. Press ENTER.

To cancel repeat play:

Press REPEAT repeatedly until “RPT OFF” appears. Press

ENTER.

Note

• After performing repeat play, be sure to press .

Otherwise, the file of USB storage device will play

continuously.

• During repeat play, random play is not possible.

• When random play is set up during repeat play, the

repeat play will be canceled.

Random play

The file of USB storage device can be played in random order

automatically.

To random play all tracks:

Press RANDOM repeatedly until “RDM ON” appears. Press

ENTER.

To cancel random play:

Press RANDOM repeatedly until “RDM OFF” appears. Press

ENTER.

Note

• In random play, the unit will select and play tracks

automatically. (You cannot select the order of the

tracks.)

• During random play, repeat play is not possible.

• When repeat play is set up during random play, random

play will be canceled.

PHONES

AUDIO IN

ANTENNA

DC IN

18 V

5 V

2.1 A

USB storage device

(commercially

available)

1 ... 20 21 22 ... 37

Comments to this Manuals

No comments

Pioneer X-SMC11-S User Manual Page 21

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer X-SMC11-S