Pioneer Elite SC-07 User Manual download pdf (Page 7)

Operations on the Receiver and Cable Connections

Connect the receiver and the computer in order to display on the computer the various data measured on

the receiver itself.

1 Connect the receiver to your PC with a RS-232C cable.

Before making or changing connections, switch off the power and disconnect the power cord from

the power outlet. Plugging in components should be the last connection you make with your

system.

• When using a notebook computer or other computer without an RS-232C terminal, this application can

be used by connecting the receiver via USB using a commercially available USB-RS-232C conversion

cable (USB-Serial cable). When using USB connections, be sure to select the proper COM port

number for data transmission (see page 9

• The type of cable to use is a female-female cross cable. Different manufacturers use different names to

refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a

“reverse” cable.

Pin-out diagram of RS-232C cable to connect receiver and PC

• The following cable has been proved to ensure system operation.

Caution

Note

Brand Cable Part NO.

Belkin Pro Series Serial Direct Cable-10 feet F3B207-10



STANDBY/ON

INPUT

SELECTOR

PHASE

CONTROL

ADVANCED

MCACC

DIGITAL VIDEO

SCALER

HDMI

MASTER

VOLUME

RS-232C RS-232C

SC-07/SC-05

Female-female

cross cable

Dsub 9-pin female

Continue

1 2 3 4 5 6 7 8 ... 38

No comments

Pioneer Elite SC-07 User Manual Page 7