Additional information06
40
En
Resetting the main unit
Use this procedure to reset all the system’s
settings to the factory default. Use the front
panel controls to do this.
1 Switch the system on.
2 While holding down the STEREO/A.L.C.
button on the front panel, press and hold
the HDMI1 button on remote control for
about two seconds.
3 Unplug the power cord.
The system has been reset to the factory
settings.
Specifications
Main unit
• Amplifier section
Rated power output
Front. . . . .50 W per channel (1 kHz, 6
Ω
, 10 %)
Center . . . . . . . . . . . . . 50 W (1 kHz, 6
Ω
, 10 %)
• Input/Output section
HDMI terminal:
Input. . . . . . . . . . . . . . . . . . . . . . . . . . .19-pin x2
Output . . . . . . . . . . . . . . . 19-pin (5 V, 100 mA)
Audio input . . . . . Coaxial x1, Optical x1 (Digital)
• Speaker section
Front speakers
Enclosure. . . . . . . . . . . . . . . . . .Closed-box type
(magnetically shielded)
System . . . . . . . . . . . . . . . .7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . .7.7 cm cone type
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . 200 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . .100 W
Center speaker
Enclosure. . . . . . . . . . . . . . . . . .Closed-box type
(magnetically shielded)
System . . . . . . . . . . . . . . . .7.7 cm 1-way system
Speakers . . . . . . . . . . . . . . 7.7 cm cone type x2
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ω
Frequency range . . . . . . . . . . 200 Hz to 20 kHz
Maximum input power . . . . . . . . . . . . . . .100 W
• Miscellaneous
Power Requirements
. . . . . . . . . . . . . . . .AC 220 V to 240 V, 50 Hz/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . 40 W
In standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
Dimensions
. . . . . . . . 900 mm (W) x 108 mm (H) x 95 mm (D)
Weight (without package). . . . . . . . . . . . . . .2.8 kg
• Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Dry cell batteries (AAA size IEC R03). . . . . . . . . .2
AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Brackets (for main unit) . . . . . . . . . . . . . . . . . . . .2
Wall mounting template . . . . . . . . . . . . . . . . . . . .1
Non-skid pads (for subwoofer) . . . . . . . . . . . . . . .4
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Operating instructions (This document)
Wireless subwoofer
• Amplifier section
Rated power output
Subwoofer . . . . . . . . 100 W (100 Hz, 4
Ω
, 10 %)
• Speaker section
Enclosure . . . . . . . . . . . . . . . . . . . Bass-reflex type
System . . . . . . . . . . . . . . . . . .16 cm 1-way system
Speakers. . . . . . . . . . . . . . . . . 16 cm cone type x1
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Ω
Frequency range . . . . . . . . . . . . 40 Hz to 1 000 Hz
Maximum input power . . . . . . . . . . . . . . . . 100 W
• Miscellaneous
Power Requirements
. . . . . . . . . . . . . . . .AC 220 V to 240 V, 50 Hz/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . 25 W
In standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
Dimensions
. . . . . . . 411 mm (W) x 181 mm (H) x 215 mm (D)
Weight (without package). . . . . . . . . . . . . . .4.3 kg
Note
• The specifications are applicable when the
power supply is 230 V.
HTP-SB300_SVYXCN_En.book 40 ページ 2009年10月23日 金曜日 午後1時58分
Comments to this Manuals