Pioneer Multi-CD DEH-P580MP User Manual download pdf (Page 36)

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ LOW/EQ MID/

EQ HIGH).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F 80 Q 1W) appears

in the display.

2 Press AUDIO to select the band for ad-

justment from among low, mid and high.

Press AUDIO repeatedly to switch between

the following functions:

LowMidHighBass (bass adjustment)

Treble (treble adjustment)

# If EQ-EX function has been selected and only

when EQ-EX is turned on and Custom is selected

as the equalizer curve, you can switch to Bass

and Treble.

3 Press c or d to select the desired fre-

quency.

Press c or d until the desired frequency ap-

pears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3.15k8k10k12.5k (Hz)

4 Press a or b to select the desired Q fac-

tor.

Press a or b until the desired Q factor ap-

pears in the display.

2N1N1W2W

Note

If you make adjustments, Custom curve is up-

dated.

Adjusting bass and treble

Use this function to adjust the bass and treble.

The ability to select the frequency as well as

the level gives you good control over the total

balance of audio.

! If EQ-EX function has been selected and

EQ-EX turned on and Custom selected as

the equalizer curve, you can adjust bass

and treble settings.

Adjusting bass and treble level

You can adjust the bass and treble level.

1 Press AUDIO to select Bass.

Press AUDIO until Bass appears in the dis-

play.

# If the treble level has been previously ad-

justed, Treble will be displayed.

2 Press c or d to select bass or treble.

Press c and Bass is displayed. Press d and

Treble is displayed.

3 Press a or b to adjust the level.

Each press of a or b increases or decreases

the selected bass or treble level. +6  6 is dis-

played as the level is increased or decreased.

Audio Adjustments

En

36

Section

08

1 ... 35 36 37 ... 113

Comments to this Manuals

No comments