Pioneer DEH-3770MP User Manual download pdf (Page 14)

234

CX-3158

1.3.5 RF level auto-adjustment (RFAGC)

This adjustment minimizes the dispersion of the RF level (RFO), which may be caused by disc-related errors, for more

stable signal transmission by changing the amp gain between RFI and RFO.

1) The microcomputer sends the command to the servo LSI to read out the output from the RF level detecting circuit

inside the servo LSI.

2) The microcomputer calculates the appropriate amp gain by using the output read out to adjust the RFO level at the

prescribed one.

3) The microcomputer sends the command to the servo LSI to adjust the amp gain into the calculated one.

This adjustment is automatically performed when:

1) During the setting-up mode, only the focus close operation ends.

2) Immediately before the setting-up ends (or right before the play mode starts)

1.3.6 Preamplifier gain adjustment

In this adjustment, when the reflected beams from disc surface are extremely weak (ex. when the lens is dirty, and a

CD-RW is loaded), the whole gain in the RFAMP block (FE, TE, and RF amplifiers) is increased by +6dB or +12dB.

When the system senses that the reflected beams from disc surface are extremely weak during the setting-up mode,

the whole RFAMP gain is increased by +6dB or +12dB.

After the gain is changed, the setting-up mode is restarted.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Pioneer DEH-3770MP User Manual Page 14