Pioneer RMF-V4011R User Manual download pdf (Page 50)

b When mounting from the front

[1] Remove the two stoppers and two metal fixtures from the cabinet. (Fig. 3-32)

[2] Pull the table to the front.

[3] Insert the screws (M5 × 35) into the holes on the table.

[4] Place the multi-projection unit on the table.

[5] Attach the metal fixtures to the table.

[6] Decide the position of the multi-projection unit and attach it to the metal fixture with the four (M5 × 10). (Fig. 3-33)

[7] Remove the screws inserted into the table at step [3], and push in until the stopper can be attached.

*As there are no stoppers at the back, be careful not to push the table in excessively.

[8] Re-tighten the stopper at the initial position.

[9] Pull out the table until it touches the stopper.

[10] Secure the cabinet table to the cabinet with the two (M5 × 35).

(Fig.3-32) (Fig.3-33)

INSTALLATION AND ASSEMBLY

Metal fixtures

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 141 142

No comments

Pioneer RMF-V4011R User Manual Page 50