Pioneer DVR-660H-S User Manual download pdf (Page 37)

Recording

37

En

05

The setting is indicated in the front panel

display, and shown on-screen together with

the recording time for a blank recordable

disc. If a recordable disc is loaded, the

approximate remaining recording time for

that disc is also shown. (Note that if the On

Screen Display setting (see On Screen

Display on page 118) is Off then this

information is not displayed.)

Basic recording from the TV

Basic recording from the TV involves just

setting the channel to record, choosing

whether to record to the HDD or a DVD and

selecting the recording quality.

1 Select the HDD or DVD for

recording.

•If you’re recording to DVD, load a

recordable disc (if you load a new blank

DVD-RW or DVD+RW disc, the recorder

takes a short while to initialize the disc).

• If you want to record a VR mode DVD-R

or a Video mode DVD-RW, you must

initialize it before proceeding (see

Initializing recordable DVD discs on

page 47).

2 Select a TV channel to record.

The front panel display shows the channel

number:

•While the recorder is stopped, you can

also use the number buttons on the

remote to select the channel (For

channel 24, press 2, 4 th

en ENTER).

•If the recorder is stopped, you can also

use the CH +/– buttons on the front

panel to select the channel number.

3 Set the picture quality/recording

time.

• See Setting the picture quality/recording

time on page 36 for detailed instructions.

4 Select the audio channel to

record.

See Changing audio channels on page 35 for

more on this.

Taiwan and Philippines model:

• When recording in VR mode (DVD) or

with HDD Recording Format set to Video

Mode Off (HDD), both mono and SAP

audio channels are recorded, allowing

you to switch the audio channel on

playback. The only exception to this is

when the picture quality is set to LPCM,

in which case you do need to select the

audio channel before recording.

Other:

• When recording in VR mode (DVD) or

with HDD Recording Format set to Video

Mode Off (HDD), if a broadcast is

bilingual, both audio channels are

recorded, allowing you to switch the

audio channel on playback. The only

exception to this is when the picture

quality is set to LPCM, in which case you

do need to select the audio channel

before recording.

5 Start recording.

If you want to set a recording end time, press

the  REC button repeatedly. The recording

time increases in 30

minute increments, up

to a maximum of six hours. The time the

recording will end is shown on-screen and in

the front panel display. When the recording

ends, the recorder automatically switches

into standby if no other operation is being

performed.

• To cancel the set recording time, press

 REC.

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

HDD

HDD DVD

CHANNEL

Channel

ch

REC MODE

AUDIO

REC

DVR660HS_TLT_EN.book 37 ページ２００８年２月２０日　水曜日　午前１１時３３分

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 139 140

Comments to this Manuals

No comments