Pioneer VSX-D2011-G User Manual download pdf (Page 15)

EASY SETUP GUIDE

Easy Setup Guide Part2

2 Playing a DVD with Surround Sound

Make sure the receiver, your TV, your subwoofer and your DVD player

are switched ON.

Press the DVD/LD button on the remote control.

You should see DVD/LD in the display on the receiver.

Play a DVD then adjust the MASTER VOLUME.

memo

Use the ∞5 buttons to select a

speaker press ENTER. Then use the

∞5 buttons to select the size of

each speaker individually. Press

ENTER. Use the ∞5 buttons to

select OK and press ENTER.

The system will output another series of test tones to

establish the proper channel level, channel delay and

acoustic calibration EQ. Again, be prepared for loud

test tones.

After it has finished, you see the SPEAKER

SYSTEMS CHECK screen. If you want to view the

settings select NEXT and press ENTER repeatedly.

If not, simply go to the next step.

Select RETURN and press ENTER to

go back to the SYSTEM SETUP

menu. Then choose EXIT to

complete the auto surround sound

setup and return to normal use.

You should now have settings that will give you

good surround sound. The MCACC indicator will

light and the surround sound settings are

complete.

• Make sure the room environment follows the

guidelines displayed on the OSD during auto

setup. If the room environment is not optimal

for auto setup (too much ambient noise,

obstacles blocking the speakers from the

microphone, etc.) the final settings may be

incorrect. Check for household appliances (air

conditioner, fridge, fan, etc.) that may be

affecting the environment and switch them off

if necessary.

• Screens will turn off after three minutes and

the receiver will automatically exit from the

setup process.

• If you leave CHECK!! or other error message

on the screen for three minutes, or you

choose CANCEL at anytime during the setup,

the settings made up to that point will be

cleared.

• After completing the AUTO SURROUND

SOUND SETUP, ACOUSTIC CAL EQ ON (ALL

CH ADJUST) is set automatically.

• Some older TVs may interfere with the

operation of the mic. If this is the case turn

the TV off when doing AUTO SURROUND

SOUND SETUP.

memo

To get a more refined sound, make the sound settings in "Expert setup" (see page 95).

If you're having trouble getting surround sound playback look at this Frequently

Asked Questions (FAQ) guide:

Q1: Even though I'm playing a DVD I'm not getting 5.1 channel playback.

A1: Either the DVD is not set for digital output, or the Dolby Digital/DTS output settings are not

correct.

Set the DVD player to output a digital signal and set the Dolby Digital and DTS output properly. If you are

unsure how to do this check the DVD initial setup in the manual that came with your DVD player.

Q2: There is no sound from the subwoofer or it is very low.

A2: There is a good possibility you haven't reached a part of the DVD that has an LFE channel

(which feeds the subwoofer) yet. The LFE channel only appears in selected parts of the

soundtrack. Continue playing and listen for the subwoofer.

If you want to hear more sound from the subwoofer set it to PLUS (see page 40 for more information and

consult the memo on page 41).

1 ... 14 15 16 ... 120

Comments to this Manuals

No comments

Pioneer VSX-D2011-G User Manual Page 15

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Pioneer VSX-D2011-G