Pioneer DJM-500 User Manual download pdf (Page 10)

NAME AND FUNCTION OF PARTS

9 Monitor Monaural/Stereo Selector Switch

(MONO/STEREO)

0 Monitor Equalizer Knob (MONITOR EQ)

Used to obtain the beat easily with the headphone moni-

tor sound.

Increases/decreases low tone.

Flat at center click.

Increases when rotated to the right. (To +12 dB at 100 Hz)

Decreases when rotated to the left. (To –12 dB at 100 Hz)

- Monitor Level Knob (MONITOR LEVEL)

Used for adjusting the headphone monitor volume.

Not affected by the master volume and master balance.

= Headphone Terminal (PHONES)

~ Channel Fader Volume

Used for adjusting the volume of CH1 to CH4.

! Assign Switch (ASSIGN A, B)

When performing cross fader using two sources (A, B),

select the channels (CH1 to CH4) to be assigned to A

and B.

Effective when the cross fader switch ($) is on (cross

fader mix).

@ Fader Start Switch (FADER START) (Refer to

Page 17.)

When the optional CD player (CDJ-500G or CDJ-500 )

is connected to the unit using the control cord, this

ON/OFF switch is used to start automatic playing of

the CD player using the channel fader or cross fader.

# Cross Fader Volume (CROSS FADER)

Adjusts the mix volume of the sources set to A and B

using the assign switch (!).

$ Cross Fader Switch (CROSS FADER ON/OFF)

OFF:

Select when mixing sounds using the channel fader volume.

(Direct mix.)

ON:

Select when mixing sounds using the cross fader. (Cross

fader mix.)

% Master Volume Level Adjustment

Used to adjust the level of the master output volume.

When the cross fader is ON, the sounds of assigns A, B

and main microphone will be output.

When the cross fader is OFF, the sounds of each channel

and main microphone will be output.

^ Master Balance Knob (MASTER BALANCE)

Used to adjust the left and right balance of the master

output.

& Booth Monitor Level Knob (BOOTH MONITOR

LEVEL)

Used to adjust the output level of the BOOTH MONITOR

terminal.

Not affected by the master volume and master balance.

* Effect Selector Switch (EFFECT SELECTOR)

AUTO BPM (Beat/minute):

Select when performing BPM detection.

DELAY:

Delays the time and repeats once.

ECHO:

Delays the time and repeats several times to produce the

echo effects.

AUTO PAN:

Shifts the left and right channels periodically.

FLANGER:

Produces periodic sound change effects by mixing the

short delay sound and original sound.

REVERB:

Produces the reverb effects.

PITCH SHIFTER:

Changes the pitch of the song.

SEND/RETURN:

Select when connecting and using the external effector.

( Effect Channel Selector (CH. SELECTOR)

Use to select the source to be effected.

) Parameter Knob (PARAMETER)

Used to adjust the parameter of the effector selected with

the effect selector switch.

DELAY:

0 to 680 mSec (2 mSec step to 100, 5 mSec step from 100

to 680)

ECHO:

0 to 680 mSec (2 mSec step to 100, 5 mSec step from 100

to 680)

AUTO PAN:

0 to 3500 mSec (5 mSec to 100, 10 mSec from 100 to 900,

20 mSec step from 900 to 3500)

FLANGER:

100 to 9000 mSec (10 mSec to 900, 50 mSec from 900

to 9000)

REVERB:

0 to 100% (1% step)

PITCH SHIFTER:

0 to ±100% (1% from 0 to 10, 2% step from 10 to 100)

_ Effect Switch (EFFECT ON/OFF)

Use to switch the effect on/off.

When turned on according to the beat, the effects will

also correspond to the beat.

When the effect is on, it goes on and off.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Pioneer DJM-500 User Manual Page 10

Comments to this Manuals

Related products and manuals for Audio Pioneer DJM-500