Pioneer AVIC X3 Operations Manual download pdf (Page 111)

109

Chapter 8 Customising the AV Source SettingAV

❒ When you set staging other than “Off”, the

high pass filter (HPF) setting turns “Off”.

➲ “Using the high pass filter” ➞ Page 109

Adjusting a position effect

You can select a listener position that you want to

make as the centre of sound effects.

1 Touch “Staging” in the Sound menu.

2 Touch “Position”.

3 Touch the desired position.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Touch “Loudness” in the Sound menu.

2 Touch “On” to turn loudness on.

To turn loudness off, touch “Off”.

3 Touch 4 or 6 to select a desired level.

Each time you touch 4 or 6 selects level in

the following order:

Low – Mid – High

Using subwoofer output

This navigation system is equipped with a sub-

woofer output which can be turned on or off.

❒ When the subwoofer output is on, you can

adjust the cut-off frequency, the output level

and the phase of the subwoofer.

1 Touch “Sub Woofer” in the Sound menu.

When Preout (the subwoofer controller set-

ting in Initial menu) is Full, you cannot select

“Sub Woofer”.

➲ “Setting the rear output and subwoofer

controller” ➞ Page 113

2 Touch “On” to turn subwoofer output on.

To turn subwoofer output off, touch “Off”.

3 Touch “Reverse” or “Normal” to select

the phase of subwoofer output.

4 Touch “+” or “–” to adjust the output

level of the subwoofer.

+6 to –6 is displayed as the level is increased

or decreased.

5 Touch 4 or 6 to select cut-off frequency.

Each time you touch 4 or 6 selects cut-off

frequencies in the following order:

50 – 80 – 125 (Hz)

Only frequencies lower than those in the

selected range are output from the subwoofer.

Using non fading output

When the non fading output setting is on, the

audio signal does not pass through navigation

system’s low pass filter (for the subwoofer), but is

output through the RCA output.

1 Touch “Non Fading” in the Sound menu.

Only when Preout (the subwoofer controller

setting in Initial menu) is Full, you can select

“Non Fading”.

➲ “Setting the rear output and subwoofer

controller” ➞ Page 113

2 Touch “On” to turn non fading output on.

To turn non fading output off, touch “Off”.

3 Touch “+” or “–” to adjust the output

level of the non fading.

+6 to –6 is displayed as the level is increased

or decreased.

Using the high pass filter

When you do not want low sounds from the sub-

woofer output frequency range to play from the

front or rear speakers, turn the HPF (high pass

filter) on. Only frequencies higher than those in

the selected range are output from the front or

rear speakers.

1 Touch “HPF” in the Sound menu.

2 Touch “On” to turn high pass filter on.

To turn high pass filter off, touch “Off”.

3 Touch 4 or 6 to select cut-off frequency.

Each time you touch 4 or 6 selects cut-off

frequencies in the following order:

50 – 80 – 125 (Hz)

When Preout (the subwoofer controller set-

ting in Initial menu) is Sub. W, the HPF

function is effective for front speakers only.

Audio Adjustments

MAN-AVIC-X3-EN.book Page 109 Wednesday, June 6, 2007 10:15 AM

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 163 164

Pioneer AVIC X3 Operations Manual Page 111

Comments to this Manuals

Pioneer AVIC X3 Operations Manual Page 111

Comments to this Manuals

Related products and manuals for Car media receivers Pioneer AVIC X3