Pioneer AVIC X3 Operations Manual download pdf (Page 62)

60

Chapter 4Editing the Navigation Utilities NAVI

“Change to another background”:

Select if you want to successively change the

Splash Screen, Audio Operating screen back-

grounds or the Navigation backgrounds.

Return to step 3.

❒ When the navigation system is reset, or the

language setting is changed, the back-

ground picture may change back to the

original picture. (There is also a possibility

that the system will revert to the original

picture for some other reason.) If this hap-

pens, set the background picture again.

Setting the Vehicle Dynamics

Display

You can change the values displayed by the

instruments on the left and right of the Vehicle

Dynamics Display.

Until the sensor’s initial learning is complete,

only the voltage and clock are displayed.

1 Switch to the Vehicle Dynamics Display.

➲

Changing the map display mode

➞

Page 32

2 Touch the left or right instrument.

Touch keys are displayed.

3 Touch the items you want to display.

You can select the following items.

“Voltage”:

Displays the power supply and voltage sup-

plied from the battery to this system.

“Acceleration”:

Displays acceleration in a forward direction.

The + sign indicates acceleration while the –

sign indicates deceleration.

“Side Acceleration”:

Displays acceleration in a side direction, such

as when turning. The + sign indicates a right

turn, while the – sign indicates a left turn.

“Angular Velocity”:

Displays the vehicle’s turning angle over one

second (how far it has turned in a second).

“Slope”:

Displays the vehicle’s vertical movement. The

+ side represents the rising angle, and the –

side the falling angle.

“Direction”:

Displays the direction your vehicle is travelling

in.

“Clock”:

Displays the current time.

“Adjust Look”:

Touch “Adjust Look” to display a screen for

selecting the panel pattern. Touch one of the

patterns from among those displayed

onscreen to change the panel to the selected

pattern.

❒ If you touch “Peak Hold Reset”, the maxi-

mum and minimum (green line) values

indicated in “Acceleration” and “Side

Acceleration” are reset.

❒ You cannot change the speedometer at the

centre.

❒ Selecting Demo Mode in the Settings

menu enables you to perform a demon-

stration with random values.

Checking the Navigation Status

The navigation status, including the driving sta-

tus of a vehicle, positioning status by satellite,

learning status of the 3D sensor and cable con-

nection status, can be checked.

Checking sensor learning status

and driving status

1 Touch “Settings” in the NAVI MENU,

then touch “Hardware Info”.

2 Touch “3D Calibration Status”.

The 3D Calibration Status screen appears.

(1)

(2)

(3)

(4)

(5)(7)(6)

MAN-AVIC-X3-EN.book Page 60 Wednesday, June 6, 2007 10:15 AM

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 163 164

Comments to this Manuals

No comments