Pioneer DEH P4200UB User Manual download pdf (Page 5)

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760

Long Beach, CA 90801-1760

800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway

Markham, Ontario L3R 0P2

1-877-283-5901

905-479-4411

For warranty information please see the Lim-

ited Warranty sheet included with this unit.

In case of trouble

Should this unit fail to operate properly, please

contact your dealer or nearest authorized

PIONEER Service Station.

Visit our website

http://www.pioneerelectronics.com

! Learn about product updates (such as firm-

ware updates) for your product.

! Register your product to receive notices

about product updates and to safeguard

purchase details in our files in the event of

loss or theft.

! Access owner's manuals, spare parts infor-

mation, service information, and much

more.

Demo mode

Important

! Failure to connect the red lead (ACC) of this

unit to a terminal coupled with ignition switch

on/off operations may lead to battery drain.

! Remember that if the feature demo continues

operating when the car engine is turned off, it

may drain battery power.

The demo automatically starts when the igni-

tion switch is set to ACC or ON while the unit

is turned off. Turning off the unit does not can-

cel demo mode. To cancel the demo mode,

press DISP/

/SCRL. Press DISP/ /SCRL

again to start. Operating the demo while the

ignition switch is set to ACC may drain battery

power.

Reverse mode

If you do not perform an operation within

about 30 seconds, screen indications start to

reverse, and then continue reversing every 10

seconds. Pressing button BAND/ESC when

power to this unit is turned off while the igni-

tion switch is set to ACC or ON cancels the re-

verse mode. Press button BAND/ESC again to

start the reverse mode.

Resetting the microprocessor

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

RESET button

1 Remove the front panel.

2 Press RESET with a pen tip or other

pointed instrument.

Before You Start

En

5

English

Section

01

1 2 3 4 5 6 7 8 9 10 ... 121 122

Comments to this Manuals

No comments