Pioneer AVH-X7500BT User Manual download pdf (Page 52)

ENGLISH

Other functions

Using an AUX source

An auxiliary device or portable device sold separately can be connected to this unit.

About AUX connection methods

You can connect auxiliary devices to this unit.

Mini pin plug cable (AUX)

When connecting an auxiliary device using a mini plug cable

iPods and portable audio/video players can be connected to this unit via mini plug

cable.

• If an iPod with video capabilities is connected to this unit via 3.5 mm plug (four pole)

cable (such as the CD-V150M), you can enjoy the video contents of the connected

iPod.

• A portable audio/video player can be connected by using a 3.5 mm plug (four pole)

with an RCA cable (sold separately). However, depending on the cable, a reverse

connection between the red (right side audio) cable and yellow (video) cable may be

required in order for the sound and video image to be reproduced correctly.

* Insert the stereo mini plug into the AUX input jack on this unit.

For more details, refer to the installation manual.

Resetting the microprocessor

By pressing RESET, you can reset the microprocessor to its initial settings without

changing the bookmark information.

The microprocessor must be reset in the following situations:

• Before using this unit for the first time after installation

• If the unit fails to operate properly

• When strange or incorrect messages appear on the display

1. Turn the ignition switch OFF.

2. Press RESET with a pen tip or other pointed instrument.

Refer to “What’s what” on page 7.

Notes

• Switch your engine ON or set the ignition switch to ACC ON before pressing RESET in the

following situations:

– After completing connections

– When erasing all stored settings

– When resetting the unit to its initial (factory) settings

Additional information

Troubleshooting

Common

Symptom Cause Action (Reference page)

The power will not turn on. The

unit will not operate.

Leads and connectors are

incorrectly connected.

Confirm once more that all

connections are correct.

The fuse is blown. Rectify the cause and then

replace the fuse. Be sure to

install a fuse with the same

rating.

Noise and/or other factors are

causing the built-in

microprocessor to operate

incorrectly.

Press RESET. (Page 52)

Operation with the remote

control is not possible. The unit

does not operate correctly

even when the appropriate

remote control buttons are

pressed.

Battery power is low. Load a new battery.

Some operations are

prohibited with certain discs.

Try operating with another disc.

Playback is not possible. The disc is dirty. Clean the disc.

The type of disc loaded cannot

be played on this unit.

Check the disc type.

The disc loaded is not

compatible with this video

system.

Change the disc to one that is

compatible with your video

system.

There is no sound. The volume

level will not rise.

Cables are not connected

correctly.

Connect the cables correctly.

The unit is performing still,

slow motion or frame-by-frame

playback.

There is no sound during still,

slow motion or frame-by-frame

playback.

There is no image displayed. The parking brake cable is not

connected.

Connect the parking brake

cable, and apply the parking

brake.

The parking brake is not

applied.

Connect the parking brake

cable, and apply the parking

brake.

The icon is displayed, and

operation is not possible.

The operation is prohibited for

the disc.

This operation is not possible.

The operation is not

compatible with the

configuration of the disc.

This operation is not possible.

13-MAN-AVH7500-GB.fm Page 52 Thursday, February 28, 2013 10:20 AM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 69 70

Comments to this Manuals

No comments

Pioneer AVH-X7500BT User Manual Page 52

Comments to this Manuals

Related products and manuals for Car Multimedia Pioneer AVH-X7500BT