Pioneer AVIC-HD3-II User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
5
THE LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE
CONNECTED TO THE POWER SUPPLY
SIDE OF THE HANDBRAKE SWITCH.
IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
To avoid the risk of accident and the
potential violation of applicable laws, this
product should never be used while the
vehicle is being driven except for
navigation purposes. Also, no part of the
navigation system should be in a location
where it is a visible distraction to the
driver.
In some countries the viewing of images
on a display inside a vehicle even by
persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed and the product’s “Video
image” features should not be used.
The navigation system detects whether your
vehicle’s handbrake is engaged and prevents you
from watching “Video image” on the “Front
Display” while driving. When you attempt to
watch “Video image”, the warning
ATTENTION! Viewing of front seat video
source while driving is strictly prohibited.
will appear on the “Front Display”.
To watch “Video image” on the “Front Display”,
park your vehicle in a safe place and apply the
handbrake.
See “Handbrake interlock” in the operation
manual for more information.
When using a display connected to
REAR MONITOR OUTPUT
NEVER install the “Rear Display” in a
location that enables the driver to watch
“Video image” while driving.
This navigation system’s REAR MONITOR
OUTPUT is for connection to a display that
enable passengers in the rear seats to watch
“Video image”.
Setting the source to rear source operation
manual
The map screen navigation images output to
the “Rear Display” differ from standard NTSC
format images. Therefore, the quality will be
inferior to the images that appear on the
“Front Display”.
The navigation system automatically switches
between the colour system (NTSC, PAL,
SECAM) for each video and outputs the video
on the “Rear Display”. To correctly output
each type of video on the “Rear Display”, we
recommend using a “Rear Display” with a
function to automatically switch the colour
system (e.g. AVD-W7900).
About rear view camera
With an optional rear view camera (sold
separately), you can use the navigation system as
an aid to keep an eye on trailers, or while backing
up.
SCREEN IMAGE MAY APPEAR
REVERSED.
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY
OR DAMAGE.
The rear view camera function is to be
used as an aid to keep an eye on trailers, or
while backing up. Do not use for
entertainment purposes.
Please note that the edges of the rear view
camera images may differ slightly
according to whether full screen images
are displayed when backing up, and
whether the images are used for checking
the rear when the vehicle is moving
forward.
MAN-HD3II-HW-EN.book Page 5 Thursday, January 31, 2008 9:15 AM
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Comments to this Manuals

No comments