Pioneer F60 Operations Manual download pdf (Page 157)

Customising the equaliser curves

You can adjust the currently selected equaliser

curve setting as desired. Adjustments can be

made with a 13-band graphic equaliser.

p If you make adjustments when a curve “S.

Bass”, “Powerful”, “Natural”, “Vocal”,or

“Flat” is selected, the equaliser curve set-

tings will be changed to “ Custom1” man-

datorily.

p If you make adjustments when the “Cus-

tom2” curve is selected for example, the

“Custom2” curve will be updated.

p “Custom1” and “Custom2” curves can be

created common to all sources.

1 Press the HOME button to display the

Top menu screen.

2 Touch the following keys in the follow-

ing order.

The “Audio” screen appears.

3 Touch [Graphic EQ].

The “Graphic EQ” screen appears.

4 Touch one of the keys to select a curve

that you want to use as the basis of custo-

mising.

5 Touch the frequency for which you

want to adjust the level.

p If you trail a finger across the bars of multi-

ple equaliser bands, the equaliser curve set-

tings will be set to the value of the touched

point on each bar.

Using the auto-adjusted equaliser

You can set the auto-adjusted equaliser to suit

the vehicle’s acoustics. To use this function,

the vehicle’s acoustics must be measured in

advance.

= For details of the operations, refer to Adjust-

ing the equaliser curve automatically (Auto

EQ) on page 157.

p To manually adjust the equaliser curve, set

“Auto EQ&TA” to “Off”.

1 Press the HOME button to display the

Top menu screen.

2 Touch the following keys in the follow-

ing order.

The “Audio” screen appears.

3 Touch [Auto EQ&TA] repeatedly until

the desired setting appears.

! Off (default):

Turns the Auto EQ&TA setting off.

! On:

Turns the Auto EQ&TA setting on.

Adjusting the equaliser curve

automatically (Auto EQ)

By measuring the vehicle’s acoustics, the

equaliser curve can be adjusted automatically

to suit the vehicle interior.

WARNING

A loud tone (noise) may be emitted from the

speakers when measuring the vehicle’s acous-

tics. Never perform Auto EQ measurement while

driving.

CAUTION

! Thoroughly check the conditions before per-

forming Auto EQ, as the speakers may be da-

maged if this is performed under the following

conditions:

— When the speakers are incorrectly con-

nected. (For example, when a rear speaker

is connected as a subwoofer output.)

Engb

157

Chapter

29

Audio adjustments

Audio adjustments

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 215 216

Comments to this Manuals

No comments