Pioneer F60 Operations Manual Page 207

  • Download
  • Add to my manuals
  • Print
  • Page
    / 216
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 206
Liquid crystal display (LCD) screen
! If the LCD screen is near the vent of an air
conditioner, make sure that air from the air
conditioner is not blowing on it. Heat from
the heater may break the LCD screen, and
cool air from the cooler may cause moist-
ure to form inside this product, resulting in
possible damage.
! Small black dots or white dots (bright dots)
may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a malfunction.
! The LCD screen will be difficult to see if it is
exposed to direct sunlight.
! When using a mobile phone, keep the aer-
ial of the mobile phone away from the LCD
screen to prevent disruption of the video in
the form of disturbances such as spots or
coloured stripes.
Maintaining the LCD screen
! When removing dust from or cleaning the
LCD screen, first turn this product off and
then wipe the screen with a soft dry cloth.
! When wiping the LCD screen, take care not
to scratch the surface. Do not use harsh or
abrasive chemical cleaners.
LED (light-emitting diode)
backlight
A light emitting diode is used inside the dis-
play to illuminate the LCD screen.
! At low temperatures, using the LED back-
light may increase image lag and degrade
the image quality because of the character-
istics of the LCD screen. Image quality will
improve with an increase in temperature.
! The product lifetime of the LED backlight is
more than 10 000 hours. However, it may
decrease if used in high temperatures.
! If the LED backlight reaches the end of its
product lifetime, the screen will become
dimmer and the image will no longer be
visible. In that case, please consult your
dealer or the nearest authorised Pioneer
Ser vice Station.
Engb
207
Appendix
Appendix
Appendix
Page view 206
1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 215 216

Comments to this Manuals

No comments