Pioneer Super Tuner III D AVH-P6850DVD User Manual download pdf (Page 88)

Black plate (88,1)

When rear view camera is

connected to AV input 2

CAUTION

Pioneer recommends the use of a camera

which outputs mirror reversed images, other-

wise screen image may appear reversed.

You can install a rear view camera onto the AV

input 2 and display a rear view camera video.

When the gear shif t is in REVERSE (R) posi-

tion, the video automatically switches to a rear

view camera video. (For more details, consult

your dealer.)

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)

and confirm if a rear view camera video

can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are

driving forward, change the rear view cam-

era setting.

! To end watching a rear view camera video

and return to the source display, press

V.ADJ.

1 Touch AV INPUT 2 on the setup menu.

2 Touch c or d on the AV INPUT 2 setting

to select B. CAMERA.

3 Touch c or d on the POLARITY setting

to select an appropriate setting for polar-

ity.

Each time you touch c or d it switches be-

tween the following polarity:

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift

is in REVERSE (R) position

! GND – When the polarity of the connected

lead is negative while the gear shift is in

REVERSE (R) position

Setting the clock

Use these instructions to set the clock.

1 Touch CLOCK ADJ on the setup menu.

2 Touch OFF to turn the clock display on.

ON will appear in the display instead of OFF.

Clock display is now on.

# To turn the clock display off, touch ON.

3 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d it will select one

segment of the clock display:

Hour—Minute

As you select segments of the clock display

the segment selected will be highlighted.

4 Touch a or b to set the clock.

Each time you touch a it increases the se-

lected hour or minute. Each time you touch b

it decreases the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching JUST.

— If the minute is 00 to 29, the minutes are

rounded down. (e.g., 10:18 becomes

10:00.)

— If the minute is 30 to 59, the minutes are

rounded up. (e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

<CRB2163-B>88

Setup

En

88

Section

18

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

Comments to this Manuals

No comments