Pioneer XDJ-AERO User Manual download pdf (Page 10)

Connections

! Connect the power cord after all the connections between devices have been completed.

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

Refer to the operating instructions for the component to be connected.

! Be sure to use the power cord and AC adapter included with this product.

Connecting the input/output terminals

Rear panel, front panel

USBDC IN MASTER OUT2MASTER OUT1

(

TRS

)

PHONO2 / LINE2

RLR

LINE PHONO

SIGNAL

GND

LRL

LINE PHONO

PHONO1 / LINE1MIC

0dBdB

MIC ATT.

PHONES

1 2 3

7 7

6 8 a9 b6

software

AC adapter (included)

To audio input terminals

Component, amplifier,

powered speaker, etc.

Microphone

Microphone cable

microphone

Audio cable

USB cable

Audio cable

To audio output

terminals

To audio output

terminals

ground wire

To ground

terminals

Analog player

DJ player

Headphones

cord

headphones

Computer

To power outlet

Power cord (included)

1 Cord hook

Catch the AC adapter’s power cord and USB cable on this hook

when using this unit.

! The sound will be interrupted if the AC adapter or USB cable is

disconnected during playback.

Using the cord hook

Fasten the AC adapter’s power cord and USB cable in place by hooking

them on the cord hook. This prevents the power cord and USB cable

from being accidentally pulled and the plugs from being disconnected

from the terminals.

USBDC IN

USB cable

AC adapter’s power cord

Cord hook

2 DC IN terminal

Connect the included AC adapter’s DC plug here. Wait until all con-

nections of the equipment are completed before connecting the

power cord.

Be sure to use the power cord and AC adapter included with this

product.

3 USB terminal

Connect to a computer.

! A USB hub cannot be used.

4 MASTER OUT 2 terminals

Connect to a power amplifier, etc.

5 MASTER OUT 1 terminals

Connect powered speakers, etc., here.

Compatible with balanced or unbalanced output for a TRS

connector.

6 LINE, PHONO selector switch

Switches the function of the [PHONO/LINE] terminals.

7 PHONO1/LINE1 and PHONO2/LINE2 terminals

Connect a phono level output device (analog player (for MM car-

tridges), etc.) or a line level output device (DJ player, etc.) here.

Switch the terminals’ function according to the connected device

using the [LINE, PHONO] selector switch on this unit’s rear panel.

8 SIGNAL GND terminal

Connects an analog player’s ground wire here. This helps reduce

noise when the analog player is connected.

9 Kensington security slot

a MIC ATT. control

Adjusts the audio level input to the [MIC] terminal.

! The gain of the sound input to the microphone differs greatly

according depending on the microphone being used. The

[MIC ATT.] control on this unit’s rear panel is used to adjust

the audio level according to the microphone before DJ perfor-

mances. During DJ performances, use the [MIC LEVEL] control

on the top of this unit to adjust the microphone’s volume.

b MIC jack

Connects a microphone here.

c PHONES jacks

Connect headphones here.

Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø

3.5 mm) can be used.

! There are two input jacks, both a stereo phones jack and a mini

phones jack, but do not use both simultaneously. If both are used

simultaneously, when one is disconnected and/or connected, the

volume of the other may increase or decrease suddenly.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments

Pioneer XDJ-AERO User Manual Page 10

Comments to this Manuals

Related products and manuals for DJ controllers Pioneer XDJ-AERO