Pioneer DCS-580 Operations Instructions Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
Other connections 10
37
En
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High Bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Using this unit with a Pioneer
Flat Screen TV
If you have a Pioneer flat screen TV
1
, you can
use an SR+ cable
2
to connect it to this unit
and take advantage of various convenient
features, such as controlling this unit via the
flat screen TV’s remote sensor, automatic
video input switching of the flat screen TV, and
automatic volume muting on the flat scree n TV.
Important
With an SR+ cable connected, the remote
must now be pointed towards your flat
screen TV rather than the remote sensor of
this unit in order to control this system.
Use a 3-ringed miniplug SR+ cable to
connect the
CONTROL IN
jack of this unit
through a media receiver to the
CONTROL
OUT
jack of your flat screen TV.
3
Before you can use the extra SR+ features, you
need to make a few settings in the unit. See
SR+ Setup for Pioneer Flat Screen TVs below for
detailed instructions.
SR+ Setup for Pioneer Flat Screen TVs
Make the following settings if you have
connected a Pioneer flat screen TV to this unit
using an SR+ cable. Note that the number of
video inputs available will depend on the flat
screen TV you’ve connected.
1Press
SHIFT+SR+
on the remote.
2Use the / to select SETUP, then
press ENTER.
Note
1 This system is compatible with all Pioneer flat screen TVs from 2003 onward.
2 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer
Customer Support division for more information on obtaining an SR+ cable.
3 You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT
jack of your flat screen TV. You can use the remote sensor of the flat screen TV (even in standby) as long as the power isn’t
switched off.
VIDEO OUT
MCACC
SETUP MIC
DIGITAL IN
CONTROL
AV CONNECTOR
IN
LINE 1
OPTICAL
LINE 2
Pioneer flat
screen TV
To control
output
DCS-580_EN.book 37 ページ 2008年2月29日 金曜日 午後8時41分
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

Comments to this Manuals

No comments