Pioneer A-70-K User Manual download pdf (Page 12)

100

04 Operation

Playing music from a digital audio

component (A-70 only)

Outputs digital signals input to the DIGITAL IN

COAXIAL connectors.

1 Make a digital input connection.

• See Digital audio input connections on page 6.

2 Press

COAXIAL

to select

DIGITAL IN

COAXIAL

as the input source.

• When using the front panel controls, rotate the

INPUT SELECTOR knob.

• Sound is produced from the RECORDER OUT

terminals.

Note

• Digital signal formats that can be input to this unit

include linear PCM signals with sampling rates and

quantitative bits up to 192 kHz/32 bits (Depending

on the connected device and environment,

operation may not be successful).

Playing music from a computer (A-70 only)

Use this function to play digital audio input to the unit's

rear panel DIGITAL IN USB port.

1 Connect the unit to a computer via USB

cable

• See Using a USB cable to connect to a computer on

page 7.

2 Press

USB

to select

DIGITAL IN USB

the input source.

• When using the front panel controls, rotate the

INPUT SELECTOR knob.

• Sound is produced from the RECORDER OUT

terminals.

3 Begin playback on the computer.

Note

• When using a USB cable to connect this unit to a

computer for playing music files, the following

linear PCM digital signals are supported:

– Quantitative bits: 16 bit, 24 bit, 32 bit

– Sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

• Playback cannot be controlled from this unit during

use of this function; use your computer to control

playback.

• When disconnecting the USB cable, always stop

playback on the computer first.

• Sound may not be produced if your computer does

not support USB 2.0 HS.

• This unit does not support use of a USB hub.

Always use a USB cable to connect the unit directly

to the computer.

Important

• When using the DIGITAL IN USB port to input

audio files from a computer to this unit, it may be

necessary to install a special driver on the

computer. For details, see the website of Pioneer.

Making an audio recording

You can make an audio recording from any audio source connected to the amplifier.

1 Select the source you want to record. 2 Start recording, then start playback of

the source component.

Caution

• Confirm that the short pin plugs are not inserted in

the RECORDER OUT terminals, since malfunction

will result if they are inserted.

iPod





Music>

Extras>

Settings>

Shuffle Songs

Backlight

/I STANDBY/ON

STANDBY

iPod/USB

5V 2.1A

PURE AUDIO Hi-Bit 32

FUNCTION







NETWORK AUDIO PLAYER

N-50

SACD/CD player

Network audio player

Turntable

Tuner

iPod dock, etc

Audio recording component

(CD recorder, tape deck, etc.)

Playback

Recording

A70_SYXE8.book 12 ページ２０１２年７月２７日　金曜日　午後６時５３分

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

Comments to this Manuals

No comments

Pioneer A-70-K User Manual Page 12

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer A-70-K