Pioneer BCS-727 User Manual download pdf (Page 87)

Troubleshooting 87

Troubleshooting

Sound

Problem Check Remedy

No sound is output.

Sound is not output

properly.

Is the disc played back in

slow motion?

Is the disc played back in fast

forward or fast reverse?

No sound is output during slow motion play and forward and reverse

scanning.

Are the cables properly

connected?

Connect the cable properly according to the connected devices

(page 41).

Insert the cable firmly and all the way in.

Is the audio cable damaged? If the cable is damaged, replace it with a new one.

Audio Output

properly set? Set Audio Output properly, according to the connected device

(page 77).

Are the connected components

properly set?

Read the operating instructions for the connected components and

check the volume, input, speaker settings, etc.

Multi-channel sound is

not output.

Is multi-channel sound

selected?

Use the menu screen or

AUDIO

to switch the disc’s sound to multi-

channel.

No sound from surround

or center speaker.

Check to confirm that the speakers are connected properly.

Check the volume setting in the

Speaker Setup

for Audio Menu menu

(page 77).

No sound from the sub-

woofer.

Whentheaudiosignalbeingplayedhasnobasscomponent,nosound

will come from the sub-woofer.

Check the volume setting in the

Speaker Setup

for Audio Menu (page 77).

Excessive noise during

radio reception.

Connect an antenna and set to the best reception position.

Set an FM antenna outside the house.

Turn power off the electric devices that may be causing the noise or

move these devices away from this unit.

Playback

Problem Check Remedy

Disc does not play.

Disc tray opens

automatically.

Is the disc one that is playable

on this player?

Check whether the disc is one that can be played on this player

(page 11).

Is the file one that is playable

on this player?

Check whether the file is one that can be played on this player (page 15).

Check whether or not the file is damaged.

Is the disc scratched? It may not be possible to play scratched discs.

Is the disc dirty? Clean the disc (page 95).

Is there a piece of paper or

sticker attached to the disc?

The disc may be warped and unplayable.

Is the disc properly set in the

disc tray?

Set the disc with the printed side facing up.

Set the disc properly in the depression in the disc tray.

Is the region number correct? See page 13 for the region numbers of discs that can be played on this

player.

Picture freezes and the

front panel and remote

control buttons stop

working.

Press (



)

STOP

to stop playback, then restart playback.

If the playback cannot be stopped, press



STANDBY/ON

on the

player’s front panel to turn off the power, then turn the power back on.

Press



STANDBY/ON

on the player for more than 5 seconds. The unit

reboots, and the operation becomes possible.

The subtitles cannot be

switched.

The subtitles cannot be switched for discs recorded on a DVD or BD

recorder.

After a disc is inserted,

stays displayed

and playback does not

start.

Are there too many files

recorded on the disc?

Whenadisconwhichfilesarerecordedisinserted,dependingonthe

number of files recorded on the disc, loading may take several dozen

minutes.

(



) is displayed in file

names, etc.

The characters that cannot be displayed on this player are displayed in

(



)

A message indicating low

memory appears while

playing a BD-ROM disc.

Connect a USB device (page 51).

Erase the data stored on the connected USB device from

BUDA

Setup

(page 81).

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 587 588

Comments to this Manuals

No comments

Pioneer BCS-727 User Manual Page 87

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer BCS-727