Pioneer BDP-160-K User Manual download pdf (Page 53)

Wireless LAN

Others

Problem Check Remedy

Network cannot be accessed

via wireless LAN.

This unit and wireless LAN

router etc. are too far apart, or

there is an obstacle between

them.

Improve the wireless LAN environment by taking steps such as moving

the unit and wireless LAN router etc. closer together.

There is a microwave oven or

other device generating

electromagnetic waves near

the wireless LAN

environment.

• Use the unit in a place away from microwave ovens or others device

generating electromagnetic waves.

• Avoid using devices generating electromagnetic waves as much as

possible when using the unit with a wireless LAN.

Multiple wireless devices are

connected to the wireless

LAN router.

When connecting multiple wireless devices, their IP addresses must be

changed.

Connection settings between

the unit and the wireless LAN

router etc. are not set up

correctly.

If the connection settings between the unit and the wireless LAN router

etc. are not set up correctly, connection settings much be performed in

order to connect the unit and the wireless LAN router etc.

The IP address settings for

the unit and the wireless LAN

router etc. (including DHCP

settings) do not match.

• Check the IP address settings of the unit and the wireless LAN router

etc. (including the DHCP setting).

• If the unit’s DHCP setting is on, turn the unit’s power off, then turn

the power back on. Check that the IP address of the unit matches the

settings of the wireless LAN router etc.

• If the unit’s DHCP setting is off, set an IP address matching the

network of the wireless LAN router etc.

For example, if the wireless LAN router’s IP address is “192.168.1.1”, set

the unit’s IP address to “192.168.1.XXX” (*1), the subnet mask to

“255.255.255.0”, and the gateway and DNS to “192.168.1.1”.

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and 248

that is not assigned to other devices.

The access point is set to

conceal the SSID.

In this case, the SSID may not be displayed on the access point list

screen. If not, set the SSID etc. by setting the wireless LAN settings on

the receiver manually.

The access point’s security

settings use WEP 152-bit

length code key or shared key

authentication.

The unit does not support WEP 152-bit length code key or shared key

authentication.

Unable to connect normally

using the Wi-Fi Direct

function.

Press

RETURN on the remote control to close the Wi-Fi Direct

Mode Screen. Then press

 and perform the controls again from the

Wi-Fi Direct Mode Screen.

Problem Check Remedy

Power does not turn on. Is the power cord properly

connected?

• Plug the power cord securely into the power outlet (page 19).

• Unplug the power cord, wait several seconds, then plug the power

cord back in.

The player’s power turns off

automatically.

Is Auto Power Off set to 10

min/20 min/30 min?

If Auto Power Off is set to 10 min/20 min/30 min, the player’s power

automatically turns off if no operation is performed for the set amount

of time (page 38).

The player’s power turns on

automatically.

Is Control set to On? The player’s power may turn on together with the power of the TV

connected to the HDMI OUT terminal. If you do not want the player’s

power to turn on when the TV’s power is turned on, set Control to Off

(page 36).

This unit cannot be operated. • Use within the specified usage temperature range (page 57).

• If the power cannot be turned off (to standby), reset the unit. Use a

thin rod to press the reset button on the main unit’s front panel. The

unit restarts and can now be operated.

BDP-160_EN_ASEAN.book 53 ページ２０１３年７月１７日　水曜日　午後４時１２分

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

Pioneer BDP-160-K User Manual Page 53

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer BDP-160-K