Pioneer DCS-424K User Manual download pdf (Page 17)

17Installation

3

Installation

3

Fix the base to the lower cabinet from

the underside, using the four screws

(M4 x 16).

4

Insert the upper cabinet to the lower

cabinet.

5

Fix the upper cabinet and the lower

cabinet from the backside of the

speaker using the two screws (M4 x

12).

CAUTION

• Becarefulnottotightenscrewsexcessively.

If excessive force is used to tighten screws,

the threads of screw and/or nut may be

damaged. Use a middle-sized manual

screwdriver during assembly. Do not use

power screwdrivers or oversized screwdrivers

that may exert excessive force on the screws

and nuts. Confirm that no foreign matter is

stuck to the base or the lower cabinet during

assembly. If the unit is assembled with

foreign matter stuck between the base and

lower cabinet, the unit may not be assembled

securely, resulting in tipping or falling.

• Donotstandonthespeakerstandbase

of the tall speaker to push or swing the

speaker. The speaker may fall and break,

or someone may be injured. Pay special

attention to children.

Connecting the cord

1.

Attach one end of the supplied speaker

cord to the rear of the each speaker.

Connect the wire with the colored

marker to the red (+) terminal; the plain

wiretotheblack(–)terminal.Press

down the spring-loaded tab and insert

the wire, as shown below. Release the

tab to secure the wire.

Red (+)

Black (–)

Red colored marker

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 279 280

Comments to this Manuals

No comments