Pioneer DCS-424K User Manual download pdf (Page 21)

21Installation

3

Installation

NOTE

• IfaconnectedHDMIdevicedoesnotaccept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or

may not output.

•WhenyouconnectaHDMIorDVI

compatible device make sure of the

following:

- Try switching off the HDMI/DVI device and

this unit. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this unit.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720x480i (or 576i), 720x480p (or 576p),

1280x720p,1920x1080ior1920x1080pvideo

input.

•NotallHDCP‑compatibleHDMIorDVI

devices will work with this unit.

- The picture will not be displayed properly

with non-HDCP device.

- This unit does not playback and TV screen

is changed to black or green screen or the

snow noise may occur on the screen.

CAUTION

•Changingtheresolutionwhenthe

connection has already been established

may result in malfunctions. To solve the

problem, turn off the unit and then turn it on

again.

•WhentheHDMIconnectionwithHDCPis

not verified, TV screen is changed to black

or green screen or the snow noise may

occur on the screen. In this case, check the

HDMI connection, or disconnect the HDMI

cable.

•Ifthereisnoiseorlinesonthescreen,

please check the HDMI cable (length is

generally limited to 4.5 m) and use a High

Speed HDMI cable (Version 1.3).

Video Connection

Connect the VIDEO OUTPUT jack on the

unit to the video in jack on the TV using a

video cable.

You can hear the sound through the

system’s speakers.

Video Connection

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 279 280

Comments to this Manuals

No comments