Pioneer P1-S User Manual download pdf (Page 13)

General control

To turn the power on

Press the  SYSTEM button on the remote control to turn on

both of the stereo receiver and CD player.

To turn on the stereo receiver only:

Press the  RECEIVER button on the remote control or the

/I STANDBY/ON button on the stereo receiver.

To turn on the CD player only:

Press the  CD button on the remote control or the

/I STANDBY/ON button on the CD player.

After use:

To turn off the unit, press the  SYSTEM/ RECEIVER/ CD

button on the rem ote control, or press the /I STANDBY/ON

button on the stereo receiver/CD player.

Setting the clock

In this example, the clock is set to the 24-hour (0:00) display.

1 Turn on the stereo receiver.

Refer to To turn the power on above for details.

2 Press the CONTROL RCV button on the remote control.

3Press the

CLOCK

button on the remote control.

The current day and time are displayed.

The default setting (Sun 0:00) is displayed when the first time

you set the clock.

4 Press ENTER button.

5Use

/

to set the day, then press ENTER.

6Use

/

to select 24-hour or 12-hour display, then

press ENTER.

7Use

/

to set the hour, then press ENTER.

8Use

/

to set the minute, then press ENTER to

confirm.

Note

•Press the CLOCK or RETURN button to exit the setting

mode without setting the clock.

To confirm the time display:

Press the CLOCK button. The current time and day are

displayed in the front panel display of the stereo receiver for

5 seconds.

Note

• The current time and day display is canceled if;

the volume is adjusted.

the SETUP, BASS +/–, TREBLE +/–, DIRECT, or SLEEP

button is pressed.

the stereo receiver is turned off.

the input source for the stereo receiver is changed.

To readjust the clock:

Perform “Setting the clock” from step 1.

Note

• If the AC power cord of the stereo receiver is

disconnected from the wall socket, the clock setting is

cleared. Set the clock.

To change the 24-hour or 12-hour display:

1 Clear all the programmed contents.

Refer to Factory reset, clearing all memory on page 27 for details.

2 Perform “Setting the clock” from step 1 onwards.

General functions

Display brightness control

Select the stereo receiver or CD player by pressing the

CONTROL RCV or CONTROL CD button on the remote

control.

Press DIMMER button to dim the display brightness. The

brightness can be controlled in four steps.

Volume control

Press the VOLUME +/– on the remote control to increase or

decrease volume, or turn the VOLUME knob on the stereo

receiver to the right to increase volume, and to the left to

decrease the volume.

CAUTION

• The sound level at a given volume setting depends on

speaker efficiency, location, and various other factors. It

is advisable to avoid exposure to high volume levels. Do

not turn the volume on to full at switch on. Listen to music

at moderate levels. Excessive sound pressure from

earphones and headphones can cause hearing loss.

Note

• If you turn off and on the stereo receiver with the volume

set to 61 or higher, the volume starts at 60.

• When the DIRECT function is off, the volume can be set

from minimum to 60.

The time is displayed in the 24-hour

display format (0:00 - 23:59).

The time is displayed in the 12-hour

display format (AM 0:00 - PM 11:59).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Comments to this Manuals

No comments

Pioneer P1-S User Manual Page 13

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer P1-S