Pioneer VSX-LX53 User Manual Page 105

  • Download
  • Add to my manuals
  • Print
  • Page
    / 110
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 104
Additional information
12
105
En
Cleaning the unit
Use a polishing cloth or dry cloth to wipe off dust and
dirt.
When the surface is dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six
times with water, and wrung out well, and then wipe
again with a dry cloth. Do not use furniture wax or
cleansers.
Never use thinners, benzene, insecticide sprays or
other chemicals on or near this unit, since these will
corrode the surface.
Our philosophy
Pioneer is dedicated to making your home theater
listening experience as close as possible to the vision of
the moviemakers and mastering engineers when they
created the original soundtrack. We do this by focusing
on three important steps:
1 Designing with carefully selected components so
as to transmit the original soundtrack accurately
2 Allowing for customized acoustic calibration
according to any listening area
3 Tuning that transmits soul
Radio wave caution
Bluetooth ADAPTER (AS-BT100)
1
uses a 2.4 GHz radio
wave frequency, which is a band used by other wireless
systems (see list below). To prevent noise or interrupted
communication, do not use this unit nearby such
devices, or make sure these devices are switched off
during use.
Cordless phones
Cordless facsimiles
Microwave ovens
Wireless LAN devices (IEEE802.11b/g)
Wireless AV equipment
Wireless controllers for game systems
Microwave-based health aids
Some baby monitors
Other, less common, equipment that may operate on the
same frequency:
Anti-theft systems
Amateur radio stations (HAM)
Warehouse logistic management systems
Discrimination systems for train or emergency
vehicles
Note
In the event noise appears in your television image,
there is the possibility that a Bluetooth
®
wireless
technology enabled device or AS-BT100 (including
products supported by AS-BT100) are causing signal
interference with the antenna input connector of your
television, video, BS tuner, CS tuner, etc. In this
event, increase the distance between the antenna
input connector and the Bluetooth wireless
technology enabled device or AS-BT100 (including
products supported by AS-BT100).
If there is something obstructing the path between
AS-BT100 (including devices supported by AS-BT100)
and the device equipped with Bluetooth wireless
technology (such as a metal door, concrete wall, or
insulation containing tinfoil), you may need to
change the location of your system to prevent signal
noise and interruptions.
This product includes FontAvenue
®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark of NEC Corporation
Note
1The Bluetooth ADAPTER (AS-BT100) is included with the VSX-LX53, sold separately for the VSX-2020.
Page view 104

Comments to this Manuals

No comments