Pioneer VSX-LX53 User Manual download pdf (Page 28)

Connecting your equipment

Connecting AM/FM antennas

Connect the AM loop antenna and the FM wire antenna

as shown below. To improve reception and sound quality,

connect external antennas (see Connecting external

antennas below).

1 Pull off the protective shields of both AM antenna

wires.

2 Push open the tabs, then insert one wire fully into

each terminal, then release the tabs to secure the AM

antenna wires.

3 Fix the AM loop antenna to the attached stand.

To fix the stand to the antenna, bend in the direction

indicated by the arrow (fig. a) then clip the loop onto the

stand (fig. b).

• If you plan to mount the AM antenna to a wall or other

surface, secure the stand with screws (fig. c) before

clipping the loop to the stand. Make sure the

reception is clear.

4 Place the AM antenna on a flat surface and in a

direction giving the best reception.

5 Connect the FM wire antenna into the FM antenna

socket.

For best results, extend the FM antenna fully and fix to a

wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception, connect an external FM

antenna to FM UNBAL 75 Ω.

To improve AM reception, connect a 5 m to 6 m length of

vinyl-coated wire to the AM LOOP terminals without

disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally

outdoors.

ANTENNA

FM UNBAL 75 AM LOOP

fig. a fig. b fig. c

ANTENNA

FM UNBAL 75 AM LOOP

75 Ω coaxial cable

ANTENNA

FM UNBAL 75 AM LOOP

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

5 m to 6 m

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 109 110

Comments to this Manuals

No comments

Pioneer VSX-LX53 User Manual Page 28

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer VSX-LX53