Using the timer 11
29
En
English
Français Español
Chapter 11:
Using the timer
Setting the clock
Setting the clock allows you to use the timer.
1
•Default setting:
1 With the power turned ON, press
TIMER/CLOCK
.
The current time is displayed on the front panel
display.
2 Press
TIMER/CLOCK again
.
‘ ’ is displayed on the front panel
display.
3 Press
ENTER
.
The hour blinks on the front panel display.
• When the clock is not set, ‘ ’ is
displayed on the front panel display.
4Use
/
to set the hour, then press
ENTER
.
The minute blinks on the front panel display.
5Use
/
to set the minute, then press
ENTER
.
The newly set value displays for 5 seconds, and
then the setting is completed.
Setting the wake-up timer
1 With the power turned ON, press
TIMER/CLOCK
.
The current time is displayed on the front panel
display.
2Press
TIMER/CLOCK twice
.
‘ ’ is displayed on the front panel
display.
3Press
ENTER
.
The hour blinks on the front panel display.
• When the wake-up timer is not set,
‘ ’ is displayed on the front panel
display.
4Use
/
to set the hour, then press
ENTER
.
The minute blinks on the front panel display.
5Use
/
to set the minute, then press
ENTER
.
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
XW-NAV1_SYXJ.book 29 ページ 2010年4月20日 火曜日 午前11時4分
Comments to this Manuals