Pioneer HTP-SB300 User Manual Page 37
- Page / 124
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Additional information 06
37
En
English Deutsch Italiano Español
Pyccкий
Français
Nederlands
Important information regarding
the HDMI connection
There are cases where you may not be able to
route HDMI signals through this system (this
depends on the HDMI equipped component
you are connecting-check with the
manufacturer for HDMI compatibility
information).
If you aren’t receiving HDMI signals properly
through this system (from your component),
please try the following configuration when
connecting up.
Configuration
1
Connect your HDMI-equipped component
directly to the display using an HDMI cable.
Then use the most convenient connection
(digital is recommended) for sending audio to
the system. See the operating instructions for
more on audio connections. Set the display
volume to minimum when using this
configuration.
No picture. •
Depending in the output settings of the source component, it may be
outputting a video format that can’t be displayed. Change the output settings
of the source, or connect your source component directly to TV using the
component or composite video jacks.
•
This system is HDCP-compatible. Check that the components you are
connecting are also HDCP-compatible. If they are not, please
connect your
source component directly to TV using the component or composite video
jacks
.
•
Depending on the connected source component, it’s possible that it will not
work with this system (even if it is HDCP-compatible). In this case,
connect your
source component directly to TV using the component or composite video
jacks
.
•
If video images do not appear on your TV or flat screen TV, try adjusting
the resolution, DeepColor or other setting for your component.
•
To output signals in DeepColor, use an HDMI cable (High Speed HDMI
TM
Cable) to connect this system to a component or TV with the DeepColor
feature.
No sound, or sound
suddenly ceases.
•
If you’ve made separate connections for audio, make sure you have assigned
the analog/digital jack(s) to the corresponding HDMI input for the component.
• Check the audio output settings of the source component.
• Check that the Audio Parameter setting is set to HDMI AMP/THRU (refer
to page 24).
•
If the component is a DVI device, use a separate connection for the audio.
Symptom Remedy
Note
1 • If your display only has one HDMI terminal, you can only receive HDMI video from the connected component.
• Depending on the component, audio output may be limited to the number of channels available from the connected
display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio limitations).
• If you want to switch the input source, you’ll have to switch functions on both the system and your display unit.
• Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the
display every time you switch input sources.
HTP-SB300_SVYXCN_En.book 37 ページ ２００９年１０月２３日 金曜日 午後１時５８分
- HTP-SB300 1
- IMPORTANT 2
- IMPORTANT: THE MOULDED PLUG 3
- Setup Guide 4
- Connection 5
- Basic operation 5
- Contents 6
- Concerning the placement of 8
- Wall mounting the main unit 9
- Installation01 10
- Additional notes on the 10
- Connecting up 11
- DIGITAL OUT 12
- OPTICAL COAXIAL 12
- Connecting up 02 13
- Connecting up02 14
- Plugging in the system 14
- Controls and displays 15
- Controls and displays03 16
- Subwoofer 16
- Controls and displays 03 17
- Remote control 17
- Listening to your system 20
- Listening to your system 04 21
- Listening in surround sound 21
- Listening in stereo 21
- Listening to your system04 22
- Using Front Stage Surround 22
- Using Stream Direct 22
- Setting the Audio options 23
- Controlling the rest of your 26
- Français 27
- Nederlands 27
- Controls for TVs 28
- Controls for other components 29
- Preset Code List 30
- Additional information 35
- Additional information06 36
- Additional information 06 37
- Precautions when using a 38
- Resetting the main unit 40
- Specifications 40
- Cleaning the unit 41
- NOTE IMPORTANTE SUR LE CABLE 43
- D’ALIMENTATION 43
- Guide d’installation 44
- Connexions 45
- Démarches de base 45
- Sommaire 46
- Installation 47
- À propos de l’emplacement de 48
- Installation 01 49
- Installation de l’unité 49
- Remarques complementaires 50
- Connexions02 52
- Connexion à votre téléviseur 52
- (pour sons télévisés) 52
- HDMI OUT 53
- Branchement du système 54
- Commandes et affichages 55
- Commandes et affichages03 56
- Caisson de basses 56
- Commandes et affichages 03 57
- Télécommande 57
- Écoute de votre système 60
- Écoute de votre système 04 61
- Écoute de votre système04 62
- Écoute en stéréo 62
- Utilisation de “Front Stage 62
- Surround Advance” 62
- Utilisation des modes Stream 63
- Réglage des options audio 63
- AUTO/ STEREO/ 66
- Commandes pour téléviseurs 67
- Liste des codes de préréglage 70
- Informations complémentaires 75
- Précautions à l’emploi du 78
- Réinitialisation de l’unité 80
- Caractéristiques techniques 80
- Nettoyage de l’appareil 81
- D3-4-2-2-1a_A1_Ru 82
- МЕРЫ ПРЕДОСТОРОЖНОСТИ ПРИ 83
- ОБРАЩЕНИИ С СЕТЕВЫМ ШНУРОМ 83
- Руководство по установке 84
- Подсоединение 85
- Основные операции 85
- Содержание 86
- Установка 87
- Относительно размещения 88
- Дополнительные замечания по 90
- Подключение 91
- Подключение системы к сети 94
- Органы управления и дисплеи 95
- Сабвуфер 96
- Прослушивание системы 100
- English Français 101
- Настройка звуковых опций 103
- Управление другими 106
- Очистка всех настроек пульта 107
- Проигрыватель 110
- Цифровой 110
- Дополнительная информация 115
- Меры предосторожности при 118
- Технические характеристики 120
- Чистка устройства 121
- PIONEER CORPORATION 124
- Корпорация Пайонир 124
Related products and manuals for Microphones Pioneer HTP-SB300
(40 pages)© 2020, manymanuals.com. All rights reserved. | 1.314 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals