Pioneer DJM-600 User Manual download pdf (Page 21)

70-139

BPM

91-180

BPM

AUTO BPM COUNTER

MASTER

4MIC

mSec

PARAMETER1

BEAT

1682

USING THE EFFECT/SAMPLER FUNCTIONS

Using Sampler Playback Functions

Following are the three available methods for playing back the sound recorded with the unit’s built-in sampler.

SINGLE PLAY

LOOP PLAY

STRETCH LOOP PLAY

Plays only while the effect/sampler ON/OFF is being pressed.

Repeatedly plays the recorded sound.

Based on the BPM of the music to be mixed, repeatedly plays the sound recorded within the set

number of beats (1, 2, 4, 8, or 16). The recorded sound will be played stretched to match the set

number of beats.

Example: Mixing stretch loop play of recorded music with music on CH-2 (BPM=130).

1 Set the effect/sampler selector switch to

STRETCH LOOP PLAY.

÷ The effect/sampler ON/OFF switch will light green.

2 Set the effect/sampler channel selector switch

to 2.

÷ LED “2” on the effect parameter/BPM display will light.

÷ The BPM of the music input to CH-2 will be displayed

on the BPM display’s counter.

* The BPM band that matches the music on CH-2 can be

selected with the BPM measurement range selector

switch.

* LED will blink if BPM cannot be measured for more

than 2 seconds. In this case, use manual mode to make

settings (see page 15).

3 Set the playback time and playback level.

÷ Press the effect beat selector switch and “8” will light

on the beat display.

* To set the playback time more precisely, use the effect/

sampler parameter 1 knob (TIME). The time that was

set will be displayed on the effect parameter/BPM

display. Playback time ranges from 10 to 16,000msec.

* The playback level is set using the effect/sampler

parameter 2 knob (LEVEL/DEPTH).

4 Set the effect/sampler ON/OFF switch to ON.

¶ When playback begins, the effect/sampler ON/OFF

switch will blink green.

BPM display

Effect parameter/

BPM display

Counter

BPM measurement

range selector

switch

LED

Beat display

Effect beat selector

switch

Using Sampler Edit Function

Use the sampler housed inside the unit to set the position

where playback of the recorded sound is completed.

1 Set the effect/sampler selector switch to EDIT.

÷ The effect sampler ON/OFF switch will light in green.

2 Set the effect/sampler ON/OFF switch to ON.

÷ When playback begins, the effect/sampler ON/OFF

switch will blink green.

3 Set the playback stop position.

÷ While monitoring the loop playback sound, set the

playback completion position (loop end point) with the

effect/sampler parameter 1 knob (TIME). The time that

was set will be displayed on the effect parameter/BPM

display.

* It is impossible to set it longer than the time that was

recorded.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Pioneer DJM-600 User Manual Page 21

Comments to this Manuals

Related products and manuals for Musical Instruments Pioneer DJM-600