Pioneer DVR-660H-S User Manual download pdf (Page 38)

Recording

05

38

En

• If you want to pause recording at any

time

1

, press  PAUSE. Press again to

restart the recording (If recording to the

HDD, DVD-RAM or DVD-R/-RW (VR

mode), a new chapter is started after

recording r estarts).

6 Press to stop recording.

• If you set the recording time in the

previous step, you can still stop the

recording anytime by pressing

F STOP REC.

•Recording will stop automatically when

there is no more space on the HDD/DVD,

or after 12 hours of HDD recording

(whichever is sooner).

About timer recordings

Using the timer recording features you can

program up to 32 timer recordings up to a

month in advance. Timer recording

programmes can be set to record just once,

every day, or every week.

There are two ways to program a timer

recording; using the Easy Timer Recording

feature (see Easy Timer Recording on

page 39) or using manual timer recording

(see Setting a manual timer recording on

page 40).

You can set the recording quality for your

timer recording in the same way as for a

regu

lar recording, but with the added option

of an AUTO mode, which maximizes the

recording quality for the space available on

the disc (if recording to DVD), or to fit on to a

blank DVD disc (if recording to the HDD).

You can set timer recordings to record to a

recordable DVD or to the hard disk drive. For

regular (daily or weekly) HDD timer

recordings that you don’t need to keep, you

can use the Auto Replace Recording feature

to automatically replace the previous timer

recording with the new one. Note that when

you use this feature, the previous recording

mad

e on that timer programme will be

replaced by the next one, regardless of

whether you have watched it yet or not.

You can also set the recorder so that it will

adjust the recording quality to try and fit the

recording on to the disc if it would not

otherwise fit at the recording quality you set

(see Optimized Rec on page 114 for more on

this).

Finally, if you set a timer recording to record

to DVD but there isn’t a recordable DVD

loaded at the time of the recording, the

Recovery Recording feature will

automatically record the programme to the

HDD for you.

Important

•A timer record

ing can’t be set if there are

already 32 timer programmes waiting to

be recorded.

•Timer recording will not start if:

– The recorder is already recording.

– A disc is being initialized, finalized or

unfinalized.

•Timer recording will start when the

operation preventing timer recording

has finished.

• When the front panel display is set to

ON, the timer indicator ( ) lights in the

front panel display when the timer is

active. If the indicator is blinking it

means that (for a DVD timer recordi

ng)

there is no disc loaded, or the disc

loaded is not recordable (for an HDD

timer recording it means that the HDD is

not recordable).

•Approximately two minutes before a

timer recording is set to start, the

recorder will go into timer recording

standby. In timer recording standby you

cannot use some functions.

• The maximum length for timer

recordings made to the HDD is 24 hours.

However, because one title (HDD) is

limited to 12 hours, recordings over

Note

1Except during Chase Play.

STOP REC

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD

DVR660HS_TLT_EN.book 38 ページ２００８年２月２０日　水曜日　午前１１時３３分

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 139 140

Comments to this Manuals

No comments