Pioneer VSX-415 User Manual download pdf (Page 42)

The System Setup menu07

42

En

Speaker setting

Use this setting to specify your speaker

configuration (size, number of speakers). It is a

good idea to make sure that the settings made

in

Using the Quick Setup

on page 10 are

correct.

1 Select

SP SET

from the SP SETUP menu.

2 Use

/

(cursor left/right) to choose the

speaker(s) that you want to set then select a

speaker size.

Use

/

(cursor up/down) to select the size

(and number) of each of the following

speakers:

•

Front

(

F

) – Select

LARGE

if your front

speakers reproduce bass frequencies

effectively, or if you didn’t connect a

subwoofer. Select

SMALL

to send the bass

frequencies to the subwoofer.

1

•

Center

(

C

) – Select

LARGE

if your center

speaker reproduces bass frequencies

effectively, or select

SMALL

to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect a center

speaker, choose

NO

(the center channel is

sent to the front speakers).

•

Surround

(

S

) – Select

LARGE

if your

surround speakers reproduce bass

frequencies effectively. Select

SMALL

to

send bass frequencies to the other

speakers or subwoofer. If you didn’t

connect surround speakers choose

NO

(the sound of the surround channels is

sent to the front speakers or a subwoofer).

•

Surround Back

(

SB

) – Select

LARGE

if your

surround back speakers reproduce bass

frequencies effectively. Select

SMALL

to

send bass frequencies to the other

speakers or subwoofer. If you didn’t

connect surround back speakers choose

NO

.

2

•

Subwoofer

(

SW

) – LFE signals and bass

frequencies of channels set to

SMALL

are

output from the subwoofer when

YES

is

selected (see notes below). Choose the

PLUS

setting if you want the subwoofer to

output bass sound continuously or you

want deeper bass (the bass frequencies

that would normally come out the front and

center speakers are also routed to the

subwoofer). If you did not connect a

subwoofer choose

NO

(the bass

frequencies are output from other

speakers).

3 When you’re finished, press RETURN.

Tip

• If you have a subwoofer and like lots of

bass, it may seem logical to select

LARGE

for your front speakers and

PLUS

for the

subwoofer. This may not, however, yield the

best bass results. Depending on the

speaker placement of your room you may

actually experience a decrease in the

amount of bass due low frequency

cancellations. In this case, try changing

the position or direction of speakers. If you

can’t get good results, listen to the bass

response with it set to

PLUS

and

YES

or the

front speakers set to

LARGE

and

SMALL

alternatively and let your ears judge which

Note

1 If you select

SMALL

for the front speakers the subwoofer will automatically be fixed to

YES

. Also, the center, surround and

surround back speakers can’t be set to

LARGE

if the front speakers are set to

SMALL

. In this case, all bass frequencies are sent

to the subwoofer.

2• If the surround speakers are set to

NO

, the surround back speakers will automatically be set to

NO

.

VSX_415-515.fm 42 ページ２００４年１２月８日　水曜日　午後３時１２分

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 107 108

Comments to this Manuals

No comments