Pioneer VSX-LX50 User Manual Page 10
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
5 minute guide
02
10
En
Problems when using the Auto MCACC Setup
If the room environment is not optimal for the Auto
MCACC Setup (too much background noise, echo off the
walls, obstacles blocking the speakers from the
microphone) the final settings may be incorrect. Check
for household appliances (air conditioner, fridge, fan,
etc.), that may be affecting the environment and switch
them off if necessary. If there are any instructions
showing in the front panel display, please follow them.
• Some older TVs may interfere with the operation of
the microphone. If this seems to be happening,
switch off the TV when doing the Auto MCACC Setup.
Playing a source
Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
1 Switch on your system components and receiver.
Start by switching on the playback component (for
example a DVD player), your TV
1
and subwoofer (if you
have one), then the receiver (press
RECEIVER
).
• Make sure the setup mic is disconnected.
2 Select the input source you want to play.
You can use the input source buttons on the remote
control,
INPUT SELECT
, or the front panel controls.
2
3 Press
S.DIRECT
(
STREAM DIRECT
) to select ‘AUTO
SURROUND’ and start playback of the source.
3
If you’re playing a Dolby Digital or DTS surround sound
DVD disc, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
• See also
Listening to your system
on page 27 for
information on different ways of listening to sources.
4 Use the volume control to adjust the volume level.
Turn down the volume of your TV so that all sound is
coming from the speakers connected to this receiver.
Better sound using Phase Control
This receiver’s Phase Control feature uses phase
correction measures to make sure your sound source
arrives at the listening position in phase, preventing
unwanted distortion and/or coloring of the sound (see
illustration below).
Phase Control technology provides coherent sound
reproduction through the use of phase matching
4
for an
optimal sound image at your listening position. The
default setting is on and we recommend leaving Phase
Control switched on for all sound sources.
• Press PHASE (
PHASE CONTROL
) to switch on phase
correction.
The
PHASE CONTROL
indicator on the front panel lights.
Note
1 Make sure that the TV’s video input is set to this receiver. (For example, if you connected this receiver to the
VIDEO 1
jacks on your TV, make sure that
the
VIDEO 1
input is now selected.)
2 If you need to manually switch the input signal type press
SIGNAL SEL
(page 30).
3• You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It should be set to output Dolby Digital, DTS
and 88.2 kHz / 96 kHz PCM (2 channel) audio, and if there is an MPEG audio option, set this to convert the MPEG audio to PCM.
• Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the receiver must be set to a
multichannel listening mode (see
Listening in surround sound
on page 27 if you need to do this) if you want multichannel surround sound.
ANALOG
AT T
SLEEP
S.RETRIEVER
RECEIVER
SOURCE
SYSTEM OFF
INPUT
SELECT
TV DVR 1
TV CTRL
iPod
RECEIVER
TUNER
HDMI 1
DVD
CDHDMI 2
CD-R/TAPE
DVR 2USB
TV CONTROL
SHIFT
VOL
STATUS
SIGNAL SEL
THX
ADV.SURR
SB ch
INPUT
SELECT
TV CH
MPX
A
B
CDE
EON
AUDI O
DISP
SUBTITLE
MULTI OPE
STANDARD
PHASE
S.DIRECT
MCACC
REC
MUTE
TV VOL
REC STOP JUKEBOX
HDD
CH CH
DVD
GUIDE
STEREO/
F.S.SURR
PHOTO
4 Phase matching is a very important factor in achieving proper sound reproduction. If two waveforms are ‘in phase’, they crest and trough together,
resulting in increased amplitude, clarity and presence of the sound signal. If a crest of a wave meets a trough (as shown in the upper section of the diagram
above) then the sound will be ‘out of phase’ and an unreliable sound image will be produced.
?
Sound
source
Sound
source
Listening
position
Listening
position
Front speaker
Subwoofer
Front speaker
Subwoofer
PHASE CONTROL ON
PHASE CONTROL OFF
SHIFT
THX
ADV.SURR
MULTI OPE
STANDARD
PHASE
S.DIRECT
MCACC
RECEIVER
VSX-LX50.book 10 ページ ２００７年４月１２日 木曜日 午後５時３分
- VSX-LX50 1
- IMPORTANT 2
- SELECTORS 3
- Voltage selector 3
- TWO VOLTAGE 3
- Contents 4
- Before you start 6
- 5 minute guide 10
- Connecting your equipment 11
- DIGITAL OUT 13
- VIDEO S-VIDEOAUDIO LR 13
- Controls and displays 22
- Listening to your system 27
- USB playback 33
- Using the tuner 35
- The System Setup menu 37
- Other connections 49
- Other Settings 56
- Using other functions 58
- Chapter 12: 62
- Confirming preset codes 63
- Renaming input source names 64
- Direct function 64
- Using multi operations 65
- Using System off 65
- Controls for TVs 66
- Controls for other components 66
- HDD (SHIFT 67
- Additional information 68
- PIONEER CORPORATION 82
- K002_B_En 82
Related products and manuals for Receivers and Amplifiers Pioneer VSX-LX50
(70 pages)
(56 pages)
(142 pages)
LG 42LA620S manuály
Uživatelské manuály a uživatelské příručky pro Audio LG 42LA620S.
Poskytujeme 1 manuály pdf LG 42LA620S ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals