Pioneer N-P01 User Manual Page 34
- Page / 54
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
34
Additional information (Network audio player: N-P01)
13
8
8
A Spotify Premium account (for a charge) must be registered
on the Spotify application.
When this unit is in standby, it cannot be selected from the
Spotify application.
The sound of the Spotify audio stream is not produced.
Check whether this unit is selected on the Spotify application.
Check that contents are playing on the Spotify application.
If the above does not solve the problem, turn this unit’s power
off then back on.
This unit’s volume does not increase when the volume
slider in the Spotify application is raised.
There is an upper limit to the volume to prevent the volume
from being too high accidentally. To raise the volume higher in
this case, do so by operating the remote control. When using
an application such as Pioneer ControlApp, the volume can
also be increased from the application.
Playback continues on this unit when the Spotify
application is quit.
The Spotify audio stream continues from this unit, even when
the Spotify application is quit. To operate again, relaunch the
Spotify application.
Wireless LAN
Network cannot be accessed via wireless LAN.
Is Network Type set to Auto and the LAN cable connected to
the player? Switch Network Type to Wireless or disconnect
the LAN cable from the player, then restart the player. If
Network Type is set to Auto and the LAN cable is connected
to the player, the player recognizes the Network Type as
Wired.
This player and base receiver (wireless LAN router, etc.) are too
far apart or there is an obstacle between them. Improve the
wireless LAN environment by moving the player and base
receiver closer together, etc.
There is a microwave oven or other device generating
electromagnetic waves near the wireless LAN environment.
Use the system in a place away from microwave ovens or
others device generating electromagnetic waves. Avoid using
devices generating electromagnetic waves as much as
possible when using the system with the wireless LAN.
Multiple wireless devices are connected to the wireless LAN
router. When connecting multiple wireless devices, their IP
addresses must be changed.
Wireless LAN connections cannot be established between the
player and base receiver (wireless LAN router, etc.). The player
must be set in order to establish wireless LAN connections.
See Connecting using wireless LAN on page 12.
The IP address settings of the player does not match the
settings of the wireless LAN router, etc. Check the IP address
settings of the player (including the DHCP setting). If the
player’s DHCP setting is on, turn the player’s power off, then
turn the power back on. Check that the IP address of the player
matches the settings of the wireless LAN router, etc. If the
player’s DHCP setting is off, set an IP address matching the
network of the base receiver (wireless LAN router, etc.). For
example, if the wireless LAN router’s IP address is
“192.168.1.1”, set the player’s IP address to “192.168.1.XXX”
(*1), the subnet mask to “255.255.255.0”, the gateway and DNS
to “192.168.1.1”.
*1) Set the “XXX” in “192.168.1.XXX” to a number between 2
and 248 that is not assigned to other devices.
The access point is set to conceal the SSID. In this case, the
SSID may not be displayed on the access point list screen. If
not, set the SSID, etc., by making the wireless LAN settings on
the player manually.
The access point’s security settings use WEP 152-bit length
code key or shared key authentication. The player does not
support WEP 152-bit length code key or shared key
authentication.
The SSID only supports use of single-byte alphanumeric
characters, together with the underbar and certain other
symbols. If using another character coding, the SSID must be
updated before making network settings. For more details
regarding SSID, consult your router’s operating instructions.
Setting quick start mode
Quick start mode significantly reduces the time required for
startup. It also allows the unit to power on automatically using
AirPlay, DLNA and Spotify application. Follow the steps below
to turn on quick start mode. Power consumption increases
when set to quick start mode when compared to regular
standby mode.
1
Press NET SERVICE, then press SETUP on the remote
control.
The Initial Setup screen is shown on the display.
2
Select ‘Option Setting’ from Initial Setup menu.
3
Select ‘Power Off Setting’ from Option Setting menu.
4
Select ‘Quick Start Mode’ from Power Off Setting menu.
5
To turn Quick Start Mode on, Use
/
to select ON,
then press ENTER.
To turn Quick Start Mode off, Use
/
to select OFF,
then press ENTER.
- XN-P02-S/-K 1
- N-P01-S/-K 1
- XN-P02DAB-S/-K 1
- 10 cm 10 cm 2
- Radio wave caution 3
- Contents 4
- Before you start 5
- <CD player PD-P01 only> 6
- 21 3 4 65 10
- WLAN antenna connection 11
- Connecting using LAN cable 12
- Connecting using wireless LAN 12
- XC-P01DAB 13
- Plugging in 13
- Setting the player 14
- General control 14
- NETWORK AUDIO PLAYER 15
- STANDBY/ON 15
- Playing your iPod/iPhone/iPad 16
- Music playback using 17
- Bluetooth 17
- BT Audio 18
- Network setting 21
- A: Wired setting 22
- (with iOS 5.0 or later) 22
- (with iOS 7.1 or later) 23
- D: WPS connection setting 24
- E: Wireless Setting 25
- 192.168.1.1 26
- Internet Radio 27
- Introduction 29
- Music Server 30
- Installing Pioneer ControlApp 31
- Using Pioneer ControlApp 31
- Troubleshooting 32
- Setting quick start mode 34
- Firmware Update 35
- Resetting this player 36
- Cautions on use 36
- About network playback 37
- About iPod/iPhone/iPad 39
- About aptX 40
- About Wi-Fi 40
- About Spotify 40
- Stereo receiver 41
- Antenna connection 42
- Speaker connection 42
- DIGITAL OUT 43
- To turn the power on 44
- Setting the clock 44
- General functions 44
- Timer and sleep operation 46
- Setting the wake-up timer 46
- Sleep operation 46
- Tuning to a FM radio station 47
- Introduction to RDS 48
- Selecting DAB 49
- DAB setup 50
- Troubleshooting chart 51
- Condensation 51
- If problem occurs 51
- Cleaning the cabinet 51
- SX-P01DAB) 52
- ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ 53
- ΟΔΗΓΙΑΣ 1999/5/ΕΚ 53
- <ARB7587-B> 54
- All rights reserved 54
Related products and manuals for Unknown Pioneer N-P01
Unknown Pioneer X-CM32BT User Manual
(40 pages)
(40 pages)
Reloop TERMINAL MIX 2 SERATO DJ BUNDLE - Serato Quick Sta Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Zubehör für Musik Reloop TERMINAL MIX 2 SERATO DJ BUNDLE - Serato Quick Sta.
Wir stellen 1 PDF-Handbücher Reloop TERMINAL MIX 2 SERATO DJ BUNDLE - Serato Quick Sta zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comments to this Manuals