search

Pioneer N-P01 User Manual Page 42

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 41
42
10
10
Connecting your equipment (Stereo receiver: SX-P01, SX-P01DAB)
Connecting your equipments (XN-P02, XN-P02DAB only)
Before making or changing the connections, turn off the power and disconnect the power cord from the AC outlet.
Antenna connection
Supplied FM wire antenna (SX-P01), DAB/FM wire
antenna (SX-P01DAB):
Connect the supplied FM wire antenna or DAB/FM wire
antenna to the FM socket or DAB/FM socket, and position the
wire antenna in the direction where the strongest signal can
be received.
External FM wire antenna:
Use an external FM wire antenna (75 ohms coaxial cable) for
better reception. When an external FM wire antenna is used,
disconnect the supplied FM wire antenna.
Note
•
Placing the wire antenna on the unit or near the AC power
lead may cause noise pickup. Place the wire antenna away
from the unit for better reception.
Speaker connection
Use speakers with an impedance of 4 ohms as lower
impedance speakers can damage the unit.
1
Loosen the knobs of the speaker output terminals.
2
Insert the speaker cable wires into each of the terminal
post holes (positive (+) cable to the red knob, and
negative (–) cable to the black knob), then tighten the
knobs.
3
Connect the other ends of the cables to the terminals of
speakers (make sure the positive and negative (+/–)
terminals on the speakers match those on the stereo
receiver).
CAUTION
•
These speaker terminals carry HAZARDOUS LIVE voltage.
To prevent the risk of electric shock when connecting or
disconnecting the speaker cables, disconnect the power
cord before touching any uninsulated parts.
•
Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
•
Do not let the bare speaker wires touch each other.
•
Make sure that all the bare speaker wire is twisted together
and inserted fully into the speaker terminal. If any of the
bare speaker wire touches the back panel, it may cause the
power to cut off as a safety measure.
ANTENNA
AC IN
Right speaker
FM wire antenna
SX-P01
Wall socket (AC 220 V to
230 V, 50 Hz)
Monaural mini-plug
cord (without resistor)
SX-P01DAB: Connect
the DAB/FM wire
antenna to the DAB/
FM socket.
To CONTROL OUT
socket of other
Pioneer component
Left speaker
Page view 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

Comments to this Manuals

No comments
Related products and manuals for Unknown Pioneer N-P01
Unknown Pioneer X-CM32BT User Manual   (40 pages)
  • Classic Phono Ctl Delta Kitchen Digital Media Pyramix
  • Radio Shack Microphone accessories Epson Fax machines KYOCERA Television antennas Lightolier Unknown Sanyo Fridges
  • Toshiba Magnia SG30 Procom PC36VFC Nokia 5130 XpressMusic Electrolux EGD6576NOK AEG SCE72716TM
  • Samsung NC220 User Manual Bauknecht WM Pure 7G41 Use and Care Guide Fujifilm FinePix S2-Pro User Manual Samsung UN55MU6500F User Manual Samsung T260N User Manual